Welding Head Stocks
and Tail Stocks
New,
Reconditioned, Used, Weld Headstock - Tailstock
NEW HEADSTOCK & TAILSTOCKS
Any ARO HS2VF "NEW" Koike-Aronson 2,500 lb
HeadStock. 2,500 lb load capacity @ 6" C.G., Variable speed
rotation from .01 to 1.0 RPM. 27.75" Fixed height to the center of
the rotational axis. 30" x 30" Square table with slots. 12
Remote pendant control. 460 Volt. "NEW" In Stock !!
Any ARO TS2 "New" Koike-Aronson 2,500 lb Tailstock. 2,500
lb Load capacity @ 6" C.G., 27.75" Fixed height to the center
of the rotational axis. 30" x 30" Square table with slots. "NEW"
In Stock
Any ARO HS4VF "NEW" Koike-Aronson 4,500 lb
HeadStock. 4,500 lb load capacity @ 6" C.G., Variable speed
rotation from .01 to 1.0 RPM. 27.75" Fixed height to the center of
the rotational axis. 30" x 30" Square table with slots. 12
Remote pendant control. 460 Volt. "NEW" In Stock !
Any ARO TS4 "New" Koike-Aronson 4,500 lb Tailstock. 4,500
lb Load capacity @ 6" C.G., 27.75" Fixed height to the center
of the rotational axis. 30" x 30" Square table with slots. "NEW"
In Stock !
USED HEADSTOCK & TAILSTOCKS
H810020 Aronson TS1000 1,000 lb Manual Special Utility
Tailstock. 30 to 45 manual adjustable height to the
center of the rotational axis. 360 degree manual rotation with brake and
45 degree pin lock. 8 diameter table. Serial #80683 Good
Condition
H810021 Aronson TS1000 1,000 lb Manual Special Utility
Tailstock. 30 to 45 manual adjustable height to the
center of the rotational axis. 360 degree manual rotation with brake and
45 degree pin lock. 8 diameter table. Serial #76727 Good
Condition
1 ea H606002 Bignall-Keeler Model 8A Dual Sided Headstock. 2,000
lb Weight Capacity. 10" Diameter Thru Hole Chuck Capacity. Variable
Speed Rotation. 44" Fixed Height to the Center of the Rotational
Axis. 230/460 Volt. Serial #5979 As-Is in Working Condition
1 ea H205007 Ransome 3T Tailstock Positioner. 3000 lb cap. @
12" C.G. from Table Surface and 12" Eccentric from Rotation
Center. 40" Square Table with Slots. Serial #63721 Good
Condition
H904009 Pandjiris TS-50 Tailstock Only. 5,000 lb
capacity @ 12 c.g., Manual rotation. 53 square table with mounting
slots. 40 to the center of the rotational axis. Serial #n/a Good
Condition
H903002 Aronson HTS-5AB Headstock/Tailstock. 5,000
lb capacity @ 6 c.g.. Constant speed rotation of 1.13 rpm (can be
converted to variable speed). 30 square tables with mounting slots.
Manual adjustable height from 27.75 to 49.75 in 6 increments.
230 or 460 volt. Serial #88631/88374. Good Condition
1 ea H805010 Aronson Model TS-6 6,000 lb Tailstock. 6,000 lb
capacity @ 12" c.g.. Fixed table height of 36" to the center
of the rotational axis. 48" square table with slots. Serial #n/a Good
Condition
H810017 Aronson TS-6 6,000 lb Tailstock. Fixed
height of 36 to the center of the rotational axis. 48 square table
with slots. Serial #7162 Good Condition
H810016 Aronson TS-10AB 10,000 lb Tailstock. 36
to 66 manual adjustable height in 6 increments. 48 square table
with slots. Serial #79167 Good Condition
1 ea H102204 Aronson HS-10 GE, 10,000 lb "Geared
Elevation" Headstock Positioner. Capacity 5 Tons @12" C.G.
from Table & Center of Rotation., Variable Speed Rotation by new AC
Inverter Control. Powered Geared Elevation of 20" to 72" Cent.
of Rot. from Floor. 36" dia. Round Table with 9" Thru Hole.
Ser. #695. PMd by Aronson. Very Good Condition
1 ea H805009 Aronson Model HS-10GE 10,000 lb Gear Elevation
Headstock. 10,000 lb capacity @ 12" c.g., Powered geared
elevation from 20" to 72" to the center of the rotational
axis. Variable speed rotation from.04 to 1.0 rpm. Pendant control for
all functions. 36" diameter round table. 230 or 460 volt. Serial
#7725 Good Condition
1 ea H805002 Irco Model RHS-10 10,000 lb Headstock. 10,000 lb
capacity @ 12" c.g., Variable speed rotation. Dual pinion drive.
Fixed table height of 72" to the center of the rotational axis.
40" x 41.25" table. Pendant control for all functions. 230 or
460 volt. Serial #12398 Good Condition
1 ea H805017 Aronson Model RVTS12/20GE 12,000 lb Geared Elevation
Tailstock on Variable Speed Travel Car with Track. 12,000 lb
capacity @ 6" c.g.. Constant speed powered geared elevation from
57" to 178" to th center of the rotational axis. Mounted on a
variable speed rack and pinion driven travel car with 46 of track.
Pendant control for all functions. 230 or 460 volt. Serial #n/a Good
Condition
1 ea H1011005 Teledyne-Readco HTS-250, 12,500 lb Headstock
Positioner. Capacity 12,500 lbs @ 12" (25,000 lbs @ 6"
with Suitable Tailstock) Var. Speed Rotation by New AC Inverter Drive. 3
HP Motor. 54" x 54" Square Table with Tee Slots. Approx.
55" Ctr. of Rot. from Floor. Ser. # 105836 Good Condition
1 ea H805003 IGM System Model RF6000 13,200 lb Tailstock. 13,200
lb capacity @ 6" c.g., Fixed height of 87" to the center of
the rotational axis. 59" diameter round table. 1988 date of mfg..
Serial #501699 Very Good Condition
1 ea H805004 IGM System Model RF6000 13,200 lb Tailstock. 13,200
lb capacity @ 6" c.g., Fixed height of 87" to the center of
the rotational axis. 59" diameter round table. 1988 date of mfg..
Serial #501699 Very Good Condition
H810019 Aronson TS-16 16,000 lb Tailstock. Fixed
height of 50 to the center of the rotational axis. 54: square table
with slots. Serial # n/a Good Condition
1 ea H805011 Aronson Model RHS-16 16,000 lb Headstock. 16,000
lb capacity @ 12" c.g., Variable speed rotation from .02 to .60
rpm. Fixed height of 50" to the center of the rotational axis.
35" diameter mounting ring - no table. Pendant control for all
functions. 230 or 460 volt. Serial #9115 Good Condition
1 ea H508004 Crossroads 90 Degree Indexing Headstock/Tailstock. 20,000
lb Concentric Load Capacity. To Index Part from Flat to 90 Degrees Only
in one Direction and then Back to Starting Position. 59" to the
Center of the Rotational Axis. Electric/Hydraulic Driven. 230/460 Volt
Input. Good Condition
H809013 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000
lb capacity @ 6 c.g., Variable speed rotation from .02 to 1.7 rpm. Dual
pinion drive. 48 Square tables with an 8.5 diameter thru
hole. 36 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 9031/9019. Good Condition
H809014 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000
lb capacity @ 6 c.g., Variable speed rotation from .02 to 1.7 rpm. Dual
pinion drive. 48 Square tables with an 8.5 diameter thru
hole. 36 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 9034/9025. Good
Condition
H809015 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000
lb capacity @ 6 c.g., Variable speed rotation from .02 to 1.7 rpm. Dual
pinion drive. 48 Square tables with an 8.5 diameter thru
hole. 36 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 9032/9024. Good Condition
H809016 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000
lb capacity @ 6 c.g., Variable speed rotation from .02 to 1.7 rpm. Dual
pinion drive. 48 Square tables with an 8.5 diameter thru
hole. 36 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 9031/9027. Good Condition
H809017 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000
lb capacity @ 6 c.g., Variable speed rotation from .02 to 1.7 rpm. Dual
pinion drive. 48 Square tables with an 8.5 diameter thru
hole. 36 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 9036/9020. Good Condition
1 set H211007 Teledyne Readco 20,000 lb Headstock/Tailstock. 20,000
lb Capacity @ 6" C.G., Variable Speed Rotation. 53" Diameter
Round Table with Slots. Forward/off/Reverse Foot Pedal. Headstock is
Mounted on a Screw Driven Variable Speed Travel Car on 9' of Track. Tailstock
has a 24" Diameter Through Hole. Pendant Control for all
Functions. Serial #106-633 Good Condition
2 sets H504001&2 Komatsu 25,000 LB Head/Tail Stocks. Cap.
25,000 @ 6" Center of Gravity off of the center line of Rotation.
These Head/Tailstocks were used with a large Robotic Manipulator that
was Welding Earth 20 ft. long Mover Boom Sections. They have Dual
Directional Hydraulic Clamping Devices for holding the fixture or work
pieces. They are designed for large Eccentric Loads and have integral
counter weights. They now have Servo Motors that are 1500 rpm and 2.8 kw.
and produce 2.1 rpm. The braking is done by a Hydraulic Disc Caliper.
The Servo Motors can be replaced by an AC Inverter Drive for Manual
Operation AS-IS No Changes We can Change to AC-Inverter
Drive with Pendant Control Variable Speed
H809018 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000
lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual
pinion drive. 54 square tables with an 8 diameter thru
hole. 50 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 908. Good Condition
H809019 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000
lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual
pinion drive. 54 square tables with an 8 diameter thru
hole. 50 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 907.
Good Condition
H809020 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000
lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual
pinion drive. 54 square tables with an 8 diameter thru
hole. 50 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 906
Good Condition
H809025 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000
lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual
pinion drive. 54 square tables with an 8 diameter thru
hole. 50 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # 909/905. Good Condition
H904003 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000
lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual
pinion drive. 36.5 round tables with a 19 diameter thru
hole. 50 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # n/a
Good Condition
H904004 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000
lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual
pinion drive. 36.5 round tables with a 19 diameter thru
hole. 50 height to the center of the rotational axis. Pendant
control. 230 or 460 volt. Serial # n/a
Good Condition
