Welding Manipulator, Boom, Masts, Columns,
Weld Head Directors and Locators
1 ea M10803 Pandjiris Model 1144-PE-VSC. Head
Director Manip. on Variable Speed Car. The Head Director is a Power
Elevated, 29" Manual Horizontal Cross Slide. The cross slide
travels vertically thru an arc. The maximum reach from the 142"
tall mast is 108". This maximum reach is at 97" from the deck
of the car and 111" from the floor. The travel car is a Model 30565
Variable Speed Car with Pendant Control. The Track (not included) is
standard rail with a 56-1/2" gauge. Boom hgt is 163" max.
58" min. when on 14" high car. Will support a single automatic
head. Excellent for Pipe Shops
1 ea M409001 Porta Tools / Lincoln Model H-600
26" x 48" Manipulator. Constant Speed Power Reach from
24" to 50", Screw Driven Constant Power Elevation from
12" to 60". Lincoln DC-600 Power Supply and a NA-5 Submerged
Arc Control and Head, Lincoln Manual Horizontal and Vertical Adjusters.
All Mounted on a Variable Speed Travel Car with 40’ of Track. Serial
#W7702-0270 Good Condition
1 ea M410002 Aronson Cricket 1C04MR04CL-MKMT 4’ x
4’ Manipulator. 4’ Constant Speed Lift from 23.5" to
71.5". 4’ Manual Reach from 7.5" to 55.5" to the Center
of the Mast. Pendant Control. Manual Mast Rotation. With a Lincoln NA-5
Sub-Arc Control and Head with Vertical and Horizontal Adjusters. All
Mounted on a Manual Travel Car. Serial #61418 Very Good
Condition
1 ea M406002 Aronson Cricket C5MR5CL 5’ x 5’
Manipulator. 5’ Constant Speed Power Lift from 28" to
88". 5’ Manual Reach from 13" to 73" from the Center of
the Mast. Manual Mast Rotation. With a Lincoln NA-5 Sub-Arc Control and
head with Manual Vertical and Horizontal Adjusters. Serial #954 Good
Condition
1 ea M010009 Lincoln/Cayuga Manipulator Travel Car
System . This System would be Excellent for a Pipe Shop Sub-arc
Station. Cayuga Manipulator is mounted on a Variable Speed Travel Car on
12’ Track. Torch Height from floor is 2’ to 7’. Var. Speed Boom
Reach of 5’. Lift is by Powered Lead Screw -No Chain. Great Value!
1 ea M003001 Cayuga 5’ X 7’ Manipulator. 7
ft. of Variable Speed Reach, 5 ft. of Constant Speed Lift. Bolt Down
Floor Mount Base with Mast Rotation. Pendant Control for all Functions.
A Heavy Duty small manipulator for suitable for Mig or Sub-Arc. Good
Condition
1 ea M301001 Ransome Model 66 6' x 6' Manipulator. 6'
Constant Speed Power Lift, 6' Variable Speed Power Reach from 3.7 to 150
IPM. Complete with a Portable Kingpin Base and 8" Vertical and
Horizontal Linde Cross Slides. Serial #6116252 Very Good Condition!
1 ea M303003 Ransome Model 66 6' x 6' Manipulator. 6'
Constant Speed Power Lift, 6' Variable Speed Power Reach from 3.7 to 150
IPM. Complete with a Portable Kingpin Base and 8" Vertical and
Horizontal Cross Slides. Serial #619326 Very Good Condition
1 ea WS404007 Aronson/Jetline
Manipulator/Positioner/Dabber Welding System. A Complete System That
Includes an Aronson Model G6MR6ML-PK 6' x 6' Manipulator (Serial
#73151) with 6' of Manual Reach from 14" to 86" from the
Center of The Mast Rotation, 6' Manual Handcrank Lift from 29" to
101" to the Bottom of the Boom. 111.5" Overall Height. Manual
Mast Rotation. Mounted on a 72" Portable "X" Frame Base.
The Welding Equipment Mounted on the Manipulator Includes a Jetline
ALC101-V6T 6" Arc Length Control, a Jetline 9029 Cold Wire Feeder
Control, a 9033 Wire Pulse Control and a Jetline Mechanical Dabber
System. Welding Heads are Mounted on a 30" Extension which has
a Manual 180 Degree Vertical and Horizontal Angle Adjuster. Welding
Equipment Mounts Over the Top of an Aronson Model D5-GP100 Positioner
(Serial #72299) 825 lb Capacity @ 6" C.G., Manual Tilt,
Variable Speed Rotation, 31" Round Table With Slots at a Fixed
Height of 31". All Equipment Calibrated in February, 2003 Good
Condition
1 ea WS404001 Ransome Positioner / Manipulator /
Sub-Arc Welding System. System Includes a Ransome 5P 500 lb Cap. @
6" C.G. Positioner (Ser. #1314851) with Power Tilt, Variable Speed
Rotation and Manual Height Adjustment. A 3JC40 40" Diameter 3-Jaw,
Self-Centering Welding Chuck. A Ransome Model 99 Manipulator (Ser.
#9526562) with 72" Power Elevation from 0 to 71" at the Torch,
Fixed Boom with a Manual Spotting Car from 44" to 88" from
Center of the Mast, Manual Mast Rotation. A Complete Lincoln DC-600
Sub-Arc System with NA-5 Control, Weld Head And A Invincible Flux
Recovery System. Very Good Condition
1 ea M003002 Cayuga 6’ X 6’ Manipulator, 6'
Variable Speed Powered Reach. 6' Constant Speed Lift. Bolt Down Floor
Mount Base with Mast Rotation. Pendant Control for All Functions.
Suitable for Mig or Sub-Arc Applications. Ser.# 768476. Good
Condition
1 ea M303001 Pandjiris Model 1000, 6 ft. X 10 ft.
Travel Car Manipulator System. This Sub Arc- Seamed Tracked System
is mounted on a Variable Speed Travel Car – No track.We can quote new
. Manipulator has 6’ of Vert. Lift with bottom of the boom from 3
ft to 9 ft. from floor. 10 ft. of Var. Speed Reach. Manual
Mast Rotation, 60" X 44" welder platform on mast. 400 lb load
capacity each end of boom. O.A.H. on track 13 ft., O.A.L. of Horz. Boom.
15ft. 3". Single Pendant "Joy Stick" control of
Manipulator & Travel Car. Weld package includes: Miller Sub-Arc with
Intellimatic System 9 Control, Cyclomatic Seam Tracker w/weld
enable-overlap-retract option, 180 to 90 Degree Head Bracket, Air Flux
Recovery Sys., 650 amp Mega-Mig Power Supply. Ser. #41-0671 Very Good
Operating Complete System!! Price with above Equip
1 ea M303004P Herrick 7' x 9' Manipulator / Travel
Car System. 7' Constant Speed Power Lift. 9' Variable Speed Power
Reach. Mounted on a Constant Speed Herrick Travel Car (Can be Converted
to Variable Speed). No Track supplied With Travel Car. Lift Chain Dose
Not have a "Fall Safe" Good Condition
1 ea M309004 Mark "V" 8' x 5' Manipulator
and Travel Car. 8' Constant Speed Power Elevation from 32" to
128". 5' Variable Speed Power Reach from 15" to 75".
Manual Mast Rotation. With 6" Linde Powered Horizontal and Vertical
Cross Slides and a Manual Rotary Slide. All Mounted on a Manual Travel
Car that Runs on Inverted Angle Iron Track (Track Not Included).
Currently Equipped with a L-Tec 650 CC/CV Power Supply, GMA Feed Head
and all Cables. Remote Control Console for all functions Including
Welding Process. Serial #6620-34-31 Good Condition
1 ea M311001 Aronson GEM 8' x 8' Geared Elevation
Manipulator. 1,000 lb Load Capacity, 8' Constant Speed Power Lift
from 23" to 119", 8' Variable Speed Power Reach, Manual Mast
Rotation, Mounted on a Portable "X" Frame Base. Serial #N/A. Very
Heavy Duty !! Good Condition
1 ea M303002 Pandjiris 8' x 9' Manipulator. 8'
Constant Speed Lift. 9' Variable Speed Reach. Manual Mast Rotation.
Complete with portable "X" Frame Base. Has
"Fall-Safe" Devise. Remote Pendant Control. Serial #600-477 Good
Condition
1 ea M307001 Koike-Aronson Locust I, 8' x 12'
Manipulator. Model #G8VRA8CL-PK, 8' Constant Speed Power Lift. 12'
Variable Speed Power Reach. 300 lob Load Capacity Both Ends. On a
Portable King Pin Base. Lincoln NA-5S Sub-Arc Head and Control with
Vertical and Horizontal Adjusters Included. Serial #75202 Very Good
Condition
1 ea M10605 Ransome 9 X 6 Model 66 Manipulator. 9
ft of Constant Speed Lift, 6 ft. of Variable Speed Reach 3.7 to 150 IPM.
Load Capacity of 250 lbs either or both ends. Has Fall Safe, Mast
rotation, Pendant Control. Now mounted on "Heavy" weighted
19" high base which could be portable. Serial #6125703 Good
Condition
1 ea. M404001 Precision 9’ x 9’ x
27-1/2’ Heavy Duty Manipulator/Travel Car System. This system was
manufactured for the Robotics Industry for precision welding on military
vehicles. Heavy Duty Mast has 9 ft. of constant speed of precision screw
driven lift starting at approx. 36" from the floor to 144"
high under the boom. The mast has manual rotation with lock. Boom has 9
ft. of "Dual Pinion" variable speed gear drive and rolls on
Thompson Roundway roller system. Weight capacity approx. 750 lb. Travel
car is 5’ x 5’ x 19" High and Variable Speed Rack & Pinion
Drive on 33 ft. of Thompson Roundway Precision Track. All three (3)-axis
paths are accordion booted. This system is now Servo driven. We will
change to Pendant AC-Inverter or D.C. Drives. Very Good Condition
1 ea M402001P Pandjiris Model 9x9rpm 9' x 10'
Manipulator. 9' Constant Speed Power lift, 10' Variable Speed Reach.
Manual Mast Rotation. This Machine Does Not Have a Fall Safe Device.
Serial #25-3209-1 (mm) As Is Only
1 ea M208001 Custom 10' x 6' Submerged Arc
Manipulator. 10' Constant Speed Lift. Working Height from 26"
to 115" Under the Torch. 6' Constant Speed Reach with a 32"
Extension. 12" Lincoln NA-5 Control and Feed Head. DC-600 Power
Supply. Optional Automatic Flux Hopper Assembly. 15' Connecting Cables.
Joy Stick Controls for Both the Manipulator and Slides. Lift Cable does
not have a "Fall Safe". Good Condition
1 ea M311004 Pandjiris Model 11X10RBM, 10' x 10'
Manipulator on Travel Car. 10' Constant Speed Power Lift from
22-1/2" to 144-1/2". 10' Variable Speed Power Reach. Manual
Mast Rotation. Mounted on a Variable Speed Travel Car that runs on
Standard 56-1/2" Gauge Rail ( Rail Not Included ). Lift Chain Does
Not Have a "Fall Safe". Serial #400-876 Good Condition
1 ea M311003 Ransome Model 1212, 10' x 12'
Manipulator. 750 lb Load Capacity Either or Both Ends, 10' Constant
Speed Power Lift. 12' Variable Speed Power Reach, Manual Mast Rotation.
Serial #627657 Good Condition
1 ea M210003 Unique 10.5' x 16' Manipulator. 10-1/2'
Screw Driven Constant Speed Powered Lift. 16' Variable Speed Powered
Reach. 600 lb Weight Capacity Either End. Mounted on a Portable King Pin
Base. Serial # N/A Good Working Condition
1 ea M004001 Aronson Locust II 12’ x 10’
Manipulator. 12’ of Variable Speed Reach from 3.3 to 100 IPM,
10’ Constant Speed Lift at 32 IPM, Bolt Down Base. 300 lb Load
Capacity Either or Both Ends. Serial #799 Good Condition
1 ea M311002 Ransome Model 1212, 12' from Floor x 11'
Manipulator. This Heavy Duty Manipulator has 11’ of Variable Speed
Powered Reach and 9 ‘ of Constant Speed Powered Lift. Bottom of the
boom Travels from 3’ to 12’ From Floor. Capacity: 750 lb Load
Either or Both Ends. Manual Mast Rotation, Mounted on a
Portable "X" Frame Base. Serial #6211821Very Good
Condition
1 ea M306002 Pandjiris Series 1000 12' x 9'
Manipulator and Travel Car. 500 lb Weight Capacity. 12' Constant
Speed Lift with Fall-Safe. 9' Variable Speed Reach from 3 to 116 IPM.
Portable Kingpin Base. Serial #800-2415-1 Good Condition
1 ea M008001P Pandjiris 12’ X 12’ Manipulator. Constant
Speed Lift, Variable Speed Reach. Pendant Control. Equipped with
Pandjiris "Fall-Safe" Device. Manual Mast Rotation w/Locks.
Model C-7 Ser.# 800-3868-1 (mm) Good Condition
1 ea M102001 Ransome "1996" Model 1212, 12'
X 12' Travel Car Manipulator. Load Cap. 750 lbs each end, or 1500
lbs total. 12 ft of Variable Speed Ram Travel, 12' of Constant speed
Lift. 360 degrees Manual Mast Rotation Mounted on a Ransome Travel Car
which runs on 56 ½" Standard Gauge Rails (not included) and is
Powered by a 1-1/2 H.P. SCR Drive from 2.5 to 100 IPM. Welding Equipment
Package Incl; Complete "1997" Lincoln DC-600, NA-5 Sub-Arc
System. Remote Pendant Controls for all Functions. Ser# 6234215 Excellent
Condition! Ready to Ship
1 ea M10901P Pandjiris 13 ft. Lift X 11 ft. Reach
"Fixed Boom with Variable Speed Carriage" Manipulator on
Mounted on Variable Speed Travel Car. This Manipulator uses a
Variable Speed, Lead Screw Driven, Welding Head Carriage for the
Horizontal Motion. The Vertical Lift of the Cantilevered Fixed Boom is
approx. 12 ft., 42" to 156" from the floor The Chain Lift Mast
has Manual Rotation with Locks. All is mounted on a 6 ft wide x 8 ft.
long Variable Speed "V" Rail Travel Car. (No Track Supplied).
Welding Package Consist of a Lincoln NA-3 Head, Control, Flux Hopper,
Power 6" Vertical Slide, Man. 6" Horz. Slide, Reel Holder,
Invincible Flux Recovery System all mounted on the Boom Carriage.
Overall Height of machine is approx. 20’- 4". The advantage of
the fixed boom system is there is a minimum of back side clearance
necessary. Lift chain does not have "Fall Safe". Good
Operating Condition
1 ea M210001P Ransome Model XXHD 13' x 15' Maximum
Heavy Duty Manipulator on Travel Car. This Manipulator has 8' of
Vertical Travel to Give You a Maximum Height of 13'2" Under The
Boom. 15' Variable Speed Travel has a 5' Extension for a Total Reach of
20'. Power Mast Rotation. Variable Speed Travel Car with 20' Track.
Lincoln DC-600/NA-3 Sub-Arc Equipment. 2,000 lb Capacity Either or
Both Ends!!! Good Condition
1 ea M10606 Pandjiris Model 1400, 14' x 10-1/2'
Traveling Manipulator System. "1993" Very Complete, System
with Lincoln Twin-Arc Weld Equipment. Heavy Duty System mounted on
#30565 Variable Speed Travel Car w/ 30' of 56-1/2" Gage Track. 14
ft of Constant 48 IPM Lift. Boom Reach of 10-1/2 ft from Center of
Mast with 7 ft Variable Speed Travel 3 to 116 IPM. Overall Height of
Mast to floor when on car & track is 20' 3-3/4". Overall Length
of Boom 20' 1". 360 Mast Rotation w/Locks, 1000 Amp Sliding Ground
thru Car & Track. Boom Mounted Swing Away Operator Console. All JIC
Wiring Code. Welding Equipment Includes: Lincoln DC-1000, AC-1200
Welders w/ NA-5 & NA-4 Heads & Controls, Remote Powered Hor./Vert
Cross Slides on Rotary Slide, Arco-Wand 7-1/2 HP Flux System, Complete
Torch Mounting Group. A&B SLC-50/2 Programmable Auto Controls, Plus
Complete Joystick Controls. Ser. #41-1512 Very Good Condition!
1 ea M406001 Koike Aronson S14VRA14CL-SK, 14’ x
14’ Scarab I, Manipulator. 14 ft. of Variable Speed Reach, Overall
Reach with Weld Package 19’ 7", 14 ft. of Constant Speed Lift
with Manual Mast Rotation and lock. Weight Capacity: 900 lbs each end.
Stationary King Pin Base mounted on a 74" x 74" x 2"
Steel Plate to bolt to your floor. Overall Height 18’-1/4",
Overall Boom Length with Welding Package. 22’ 6" Welding Package
includes: Miller CP/CC-1500 Power Factor Corrected, Miller A-2A
Automatic Sub-Arc Head & Control. Push Button Operator Control for
Head Positioning with Powered Cross Slide. All Cables, Hoses, And
Wiring. Serial #90300 This 1990 System is Ready to Weld and is in
Very Good Condition
1 ea M306001 Koike-Aronson Model S14VRA14CI-PK 14' x
14' Manipulator. 900 lb Load Capacity Either or Both Ends. 14'
Variable Speed Power Reach from 3.3 to 100 IPM. 14' Constant Speed Power
Lift from 38" to 206". Portable Kingpin Base. Serial #81265 No
Welding Equipment included: Good Condition
1 ea M10305P Pandjiris H-1000, Precision "Screw
Drive" Manipulator. This Manipulator was Built for NASA to
" Dabber Pulse Tig" Weld Rocket Sections. Mast overall Height
on Mounting Plate is 187" with 114"Variable Speed Lift from
18.5" to 132.5". Cross Section of Heavy Duty Mast is 17"
x 13", Floor Mounting Plate is 12" x 60" x 2" Thick
with Manual Mast Rotation that has 4 Shot Pin Stabilization Locations.
The Heavy Duty Horizontal Boom is 180" Overall Length with
108" Variable Speed Travel from 18" to 126". Manipulator
Tig Welding Process Require this type of Heavy Duty, Solid Rigidity with
Smooth Screw Drives. No Welding Equipment Included in Price. Serial
#60-4559.Ready to Go!! -"1990" Excellent Condition
