Take a look below at a few of the many
new and reconditioned used weld manipulators. We have them in stock right now!!
Used Welding Column Booms Sub Arc Head Manipulators,
Pandjiris, Aronson, Ransome, Jetline, Preston-Eastin
and others in our inventory.
WELDING MANIPULATORS
1 ea ARO 99 10X10 "NEW" Ransome Model 99 10
x 10 Manipulator. 10 Constant Speed Power Lift at 40
IPM from 28-1/2" to 148-1/2" to the center of the
Boom. 10 Variable Speed Power Reach of 1.5 to 150 IPM from
24" to 144" from the Center of the Mast. 500 lb
Weight Capacity Either or Both Ends. 360 Degree Manual
Rotation on a Bolt Down Base. Joy Stick Control. In Stock
as of July 1, 2007
1 ea ARO 99BS "NEW" Ransome Free Standing
Base. For Model 99 10 x 10 Manipulator In Stock
as of July 1,2007
3 ea ARO 99 12X10 "NEW" Ransome Model 99 12
x 10 Manipulator. 12 Constant Speed Power Lift at 40
IPM from 28-1/2" to 172-1/2" to the center of the
Boom. 10 Variable Speed Power Reach of 1.5 to 150 IPM from
24" to 144" from the Center of the Mast. 500 lb
Weight Capacity Either or Both Ends. 360 Degree Manual
Rotation on a Bolt Down Base. Joy Stick Control. In Stock
as of July 1, 2007
3 ea ARO 99 12X12 "NEW" Ransome Model 99 12
x 12 Manipulator. 12 Constant Speed Power Lift at 40
IPM from 28-1/2" to 172-1/2" to the center of the
Boom. 12 Variable Speed Power Reach of 1.5 to 150 IPM from
24" to 168" from the Center of the Mast. 500 lb
Weight Capacity Either or Both Ends. 360 Degree Manual
Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of July 1, 2007
1 ea ARO 99BL "NEW" Ransome Optional Free
Standing Base. For Model 99 12 x 10 or 12 x 12
Manipulator In Stock as of In Stock as of July
1, 2007
1 ea ARO 1212 14X12 "NEW" Ransome Model 1212
14 x 12 Manipulator. 14 Constant Speed Power Lift
at 36 IPM from 28-1/2" to 148-1/2" to the center of
the Boom. 12 Variable Speed Power Reach of 1.8 to 180 IPM
from 30-1/2" to 174-1/2" from the Center of the
Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree
Manual Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of In Stock as of July 1, 2007
1 ea ARO 1212 14X14 "NEW" Ransome Model 1212
14 x 14 Manipulator. 14 Constant Speed Power Lift
at 36 IPM from 28-1/2" to 148-1/2" to the center of
the Boom. 14 Variable Speed Power Reach of 1.8 to 180 IPM
from 30-1/2" to 198-1/2" from the Center of the
Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree
Manual Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of In Stock as of July 1, 2007
1 ea ARO 1212BL "NEW" Ransome Optional Free
Standing Base. For Model 1212 14 x 12 or 14 x
14 Manipulator. In Stock as of In Stock as
of July 1, 2007
1 ea WPI TCM "NEW" Universal Manipulator
Variable Speed Travel Car. Variable Speed Travel from
3" to 135" IPM that runs on 56-1/2" A.S.C.E.
60# Machined Rail Track. Pendant Control. 230/460 Volt. "NEW"
Any WPI TCT "New" Universal Track for
Manipulator Travel Car. 10 x 56-1/2" A.S.C.E. 60#
Machined Rail Track. "NEW"
NEW & USED MANIPULATORS
8 ea M610004 Positech Model "G" Simple Air
Manipulator. Positech Model G SAM Parts Manipulator uses
Pneumatic Power to Provide Quick Response and Superior
Maneuverability with Loads up to 370 lbs. Vertical Lift from
44.7" to 87.3". Reach from 66" to 126".
360 Degree Full Rotation. Includes Portable Base with Fork
Truck Lifting Slots. Good Condition
1 ea M10803 Pandjiris Model 1144-PE-VSC. Head Director
Manipulator on Variable Speed Car. The Head Director is a
Power Elevated, 29" Manual Horizontal Cross Slide. The
cross slide travels vertically thru an arc. The maximum reach
from the 142" tall mast is 108". This maximum reach
is at 97" from the deck of the car and 111" from the
floor. The travel car is a Model 30565 Variable Speed Car with
Pendant Control. The Track (not included) is standard rail
with a 56-1/2" gauge. Boom hgt is 163" max. 58"
min. when on 14" high car. Will support a single
automatic head. Excellent for Pipe Shops
1 ea M409001 Porta Tools / Lincoln Model H-600 26"
x 48" Manipulator. Constant Speed Power Reach from
24" to 50", Screw Driven Constant Power Elevation
from 12" to 60". Lincoln DC-600 Power Supply and a
NA-5 Submerged Arc Control and Head, Lincoln Manual Horizontal
and Vertical Adjusters. All Mounted on a Variable Speed Travel
Car with 40 of Track. Serial #W7702-0270 Good Condition
1 ea M410002 Aronson Cricket 1C04MR04CL-MKMT 4 x 4
Manipulator. 4 Constant Speed Lift from 23.5" to
71.5". 4 Manual Reach from 7.5" to 55.5" to
the Center of the Mast. Pendant Control. Manual Mast Rotation.
With a Lincoln NA-5 Sub-Arc Control and Head with Vertical and
Horizontal Adjusters. All Mounted on a Manual Travel Car.
Serial #92151 Very Good Condition
1 ea M701003 Ransome Model 44 4 x 4 Manipulator. 4
constant speed power lift from 20" to 68". 4
manual reach from 14" to 62" from the center of mast
rotation. 135 lb load capacity. 360 degree manual mast
rotation. Manual travel car. 115 volt. Serial #0526804 Good
Condition
1 ea M606007 Ransome Model 44 4 x 4 Manipulator /
Travel Car. 4 Constant Speed Powered Lift from 25"
to 73". Manual Reach from 9" to 57" from the
Center of Mast Rotation. Manual King Pin Base. Manual Travel
Car. 115 Volt. Serial #0526806 Good Condition
1 ea M506002 Ransome Model 66 4 x 4
Manipulator. 250 lb Load Capacity Either ore Both Ends.
4 Powered Elevation from 15" to 63". 4
Variable Speed Reach from 18" to 63" from the Center
of the Mast. 360 Degree Manual Rotation. Floor Mount Base.
Welding Equipment NOT Included. Serial #6121376 Good
Condition
1 ea M406002 Aronson Cricket C5MR5CL 5 x 5
Manipulator. 5 Constant Speed Power Lift from 28"
to 88". 5 Manual Reach from 13" to 73" from
the Center of the Mast. Manual Mast Rotation. With a Lincoln
NA-5 Sub-Arc Control and head with Manual Vertical and
Horizontal Adjusters. Serial #954 Good Condition
1 ea M610005 Aronson Model G6VPA6CL-PK 6 x 6
Scarab Manipulator. 6 Constant Speed Powered Lift from
29" to 101". 6 Variable Speed Power Reach from
14" to 86". 400 lb Load Capacity Either or Both
Ends. 360Degree Manual Mast Rotation. Portable "X"
Frame Base. Serial # 85240 Good Condition
1 ea M301001 Ransome Model 66 6' x 6' Manipulator. 6'
Constant Speed Power Lift, 6' Variable Speed Power Reach from
3.7 to 150 IPM. Complete with a Portable Kingpin Base and
8" Vertical and Horizontal Linde Cross Slides. Serial
#6116252 Very Good Condition!
1 ea M303003 Ransome Model 66 6' x 6' Manipulator. 6'
Constant Speed Power Lift, 6' Variable Speed Power Reach from
3.7 to 150 IPM. Complete with a Portable Kingpin Base and
8" Vertical and Horizontal Cross Slides. Serial #619326 Very
Good Condition
1 ea M603009 Ransome Model 66 Travel Car Manipulator. 6
Constant Speed Power Lift from 35.5" to 131.5". 6
Variable Speed Power Reach from 13" to 85". Variable
Speed Travel Car from 3.75 to 150 IPM that runs on 30 of 33
Gauge Rack and Pinion Track. Serial #617374 Good Condition
1 ea M702009 Preston-Eastin Model MA-66LD 6 x 6. 6
constant speed power lift from 22" to 94". 6
manual reach from 17" to 89" from the center of mast
rotation. 100 lb load capacity either or both ends. 360 degree
manual mast rotation.. Manual travel car. 115 volt. Serial
#N/A Good Condition
1 ea M702008 Bowers Model M6-PB-LD 6 x 6
Manipulator. 6 constant speed power lift from 27"
to 99". 6 variable speed power reach from 12" to
84" from the center of mast rotation. 360 degree manual
rotation. Manual travel car. Pendant control for all
functions. 115 volt. Serial #970335 Good Condition
1 ea WS404007 Aronson/Jetline
Manipulator/Positioner/Dabber Welding System. A Complete
System That Includes an Aronson Model G6MR6ML-PK 6' x 6'
Manipulator (Serial #73151) with 6' of Manual Reach from
14" to 86" from the Center of The Mast Rotation, 6'
Manual Handcrank Lift from 29" to 101" to the Bottom
of the Boom. 111.5" Overall Height. Manual Mast Rotation.
Mounted on a 72" Portable "X" Frame Base. The
Welding Equipment Mounted on the Manipulator Includes a
Jetline ALC101-V6T 6" Arc Length Control, a Jetline 9029
Cold Wire Feeder Control, a 9033 Wire Pulse Control and a Jetline
Mechanical Dabber System. Welding Heads are Mounted on a
30" Extension which has a Manual 180 Degree Vertical and
Horizontal Angle Adjuster. Welding Equipment Mounts Over the
Top of an Aronson Model D5-GP100 Positioner (Serial
#72299) 825 lb Capacity @ 6" C.G., Manual Tilt, Variable
Speed Rotation, 31" Round Table With Slots at a Fixed
Height of 31". All Equipment Calibrated in February,
2003 Good Condition0.
1 ea M003002 Cayuga 6 X 6 Manipulator, 6'
Variable Speed Powered Reach. 6' Constant Speed Lift. Bolt
Down Floor Mount Base with Mast Rotation. Pendant Control for
All Functions. Suitable for Mig or Sub-Arc Applications. Ser.#
768476
1 ea M309004 Mark "V" 8' x 5' Manipulator and
Travel Car. 8' Constant Speed Power Elevation from
32" to 128". 5' Variable Speed Power Reach from
15" to 75". Manual Mast Rotation. With 6" Linde
Powered Horizontal and Vertical Cross Slides and a Manual
Rotary Slide. All Mounted on a Manual Travel Car that Runs on
Inverted Angle Iron Track (Track Not Included). Currently
Equipped with a L-Tec 650 CC/CV Power Supply, GMA Feed Head
and all Cables. Remote Control Console for all functions
Including Welding Process. Serial #6620-34-31 Good
Condition
1 ea M704018 Pandjiris Double 8, 8 x 8
Manipulator. 8 constant speed powered lift from
20-5/8" to 112", 3 to 110 ipm variable speed powered
reach from 21" to 117" from the center of the
column. 360 degree manual rotation. 300 lb load capacity. Anti
fall devise. Bolt down base. Welding equipment NOT
included. 460 volt. Serial #400-7762 Good Condition
1 ea M506003 Ransome Model 1212 8 x 10 Travel Car
Manipulator. 750 lb Load Capacity Either or Both Ends.
8 Powered Lift from 54" to 174". 10 Variable
Speed Reach from 30" to 150" from the Center of the
Mast. 360 Degree Manual Mast Rotation. Mounted on a Variable
Speed Rack and Pinion Driven Ransome Travel Car with 20 of
Track.. This Machine Does Not Have a Fall Safe Device.
Welding Equipment NOT Included. Serial #1245 Good Condition
1 ea. M404001 Precision 9 x 9 x 27-1/2
Heavy Duty Manipulator/Travel Car System. This system was
manufactured for the Robotics Industry for precision welding
on military vehicles. Heavy Duty Mast has 9 ft. of constant
speed of precision screw driven lift starting at approx.
36" from the floor to 144" high under the boom. The
mast has manual rotation with lock. Boom has 9 ft. of
"Dual Pinion" variable speed gear drive and rolls on
Thompson Roundway roller system. Weight capacity approx. 750
lb. Travel car is 5 x 5 x 19" High and Variable
Speed Rack & Pinion Drive on 33 ft. of Thompson Roundway
Precision Track. All three (3)-axis paths are accordion
booted. This system is now Servo driven. We will change to
Pendant AC-Inverter or D.C. Drives. Very Good Condition
1 ea ARO 99 10X10 "NEW" Ransome Model 99 10
x 10 Manipulator. 10 Constant Speed Power Lift at 40
IPM from 28-1/2" to 148-1/2" to the center of the
Boom. 10 Variable Speed Power Reach of 1.5 to 150 IPM from
24" to 144" from the Center of the Mast. 500 lb
Weight Capacity Either or Both Ends. 360 Degree Manual
Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of July 1, 2007
3 ea ARO 99 12X10 "NEW" Ransome Model 99 12
x 10 Manipulator. 12 Constant Speed Power Lift at 40
IPM from 28-1/2" to 172-1/2" to the center of the
Boom. 10 Variable Speed Power Reach of 1.5 to 150 IPM from
24" to 144" from the Center of the Mast. 500 lb
Weight Capacity Either or Both Ends. 360 Degree Manual
Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of July 1, 2007
3 ea ARO 99 12X12 "NEW" Ransome Model 99 12
x 12 Manipulator. 12 Constant Speed Power Lift at 40
IPM from 28-1/2" to 172-1/2" to the center of the
Boom. 12 Variable Speed Power Reach of 1.5 to 150 IPM from
24" to 168" from the Center of the Mast. 500 lb
Weight Capacity Either or Both Ends. 360 Degree Manual
Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of July 1, 2007
1 ea ARO 1212 14X12 "NEW" Ransome Model 1212
14 x 12 Manipulator. 14 Constant Speed Power Lift
at 36 IPM from 28-1/2" to 148-1/2" to the center of
the Boom. 12 Variable Speed Power Reach of 1.8 to 180 IPM
from 30-1/2" to 174-1/2" from the Center of the
Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree
Manual Rotation on a Bolt Down Base. Joy Stick Control. In
Stock as of July 1, 2007
1 ea ARO 1212 14X14 "NEW" Ransome Model 1212
14 x 14 Manipulator. 14 Constant Speed Power Lift
at 36 IPM from 28-1/2" to 148-1/2" to the center of
the Boom. 14 Variable Speed Power Reach of 1.8 to 180 IPM
from 30-1/2" to 198-1/2" from the Center of the
Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree
Manual Rotation on a Bolt Down Base. Joy Stick Control.
In Stock as of July 1, 2007
1 ea M10901P Pandjiris 13 ft. Lift X 11 ft. Reach
"Fixed Boom with Variable Speed Carriage" Manipulator
on Mounted on Variable Speed Travel Car. This Manipulator
uses a Variable Speed, Lead Screw Driven, Welding Head
Carriage for the Horizontal Motion. The Vertical Lift of the
Cantilevered Fixed Boom is approx. 12 ft., 42" to
156" from the floor The Chain Lift Mast has Manual
Rotation with Locks. All is mounted on a 6 ft wide x 8 ft.
long Variable Speed "V" Rail Travel Car. (No Track
Supplied). Welding Package Consist of a Lincoln NA-3 Head,
Control, Flux Hopper, Power 6" Vertical Slide, Man.
6" Horz. Slide, Reel Holder, Invincible Flux Recovery
System all mounted on the Boom Carriage. Overall Height of
machine is approx. 20- 4". The advantage of the fixed
boom system is there is a minimum of back side clearance
necessary. Lift chain does not have "Fall Safe".
Good Operating Condition
MANIPULATOR OPTIONS
1 ea ARO 99BS "NEW" Ransome Free Standing
Base. For Model 99 10 x 10 Manipulator In
Stock as of July 1, 2007
1 ea ARO 99BL "NEW" Ransome Optional Free
Standing Base. For Model 99 12 x 10 or 12 x 12
Manipulator In Stock as of July 1, 2007.
1 ea ARO 1212BL "NEW" Ransome Optional Free
Standing Base. For Model 1212 14 x 12 or 14 x
14 Manipulator. In Stock as of July 1, 2007
1 ea WPI TCM "NEW" Universal Manipulator
Variable Speed Travel Car. Variable Speed Travel from
3" to 135" IPM that runs on 56-1/2" A.S.C.E.
60# Machined Rail Track. Pendant Control. 230/460 Volt. "NEW"
Any WPI TCT "New" Universal Track for
Manipulator Travel Car. 10 x 56-1/2" A.S.C.E. 60#
Machined Rail Track. "NEW" ea
Any LIN NA3U Used Lincoln NA-3 Sub-Arc Welding System.
Complete with NA-3 control, NA-3S head, contact nozzle
assembly, flux hopper, 60 lb wire real assembly, horizontal
adjuster, vertical adjuster and 35 control / welding lead
cable. Power supply NOT included. Good Operating Condition
Additional 25 of Control Cable / Welding Lead
Any LIN NA5U Used Lincoln NA-5 Sub-Arc Welding System.
Complete with NA-5 control, NA-5S head, contact nozzle
assembly, flux hopper, 60 lb wire real assembly, horizontal
adjuster, vertical adjuster and 35 control / welding
lead cable. Power supply NOT included. Good Operating
Condition Mounting Charge Additional 25 of Control Cable /
Welding Lead
Any PAN 61M "NEW" Pandjiris Model 61-M Manual
Cross Slides. 200 lb Capacity @ 6" C.G., 6"
Stroke. Hand Wheel Adjustment. Priced Per Pair. NEW IN
STOCK!
Any PAN 61P "NEW" Pandjiris Model 61-Powered
Cross Slides. 200 lb Capacity @ 6" C.G., 6"
Stroke. Motorized constant speed travel. Joystick control. Priced
Per Pair. NEW IN STOCK!
All of the above listings of welding manipulator's above have pictures
and can be seen by placing the part number in the search window below.
Or if you wish to see the complete list of pictures visit the welding manipulator photo page.
Welding
Manipulator Pictures
