ROBOTIC TURNTABLES - POSITIONERS
1 ea RW006008 Miller 1997 Maxtron 450 CC/CV with Miller Robotic Interface System. Includes: Welder, Interface Control, DW Interface, AID-4 Wire Drive, Dvc-DW Cont. Like New.
1 ea RP210003P Koike-Aronson RHS10/T2.5-30SD Robotic "Skyhook" Positioner. 2500 lb Load Capacity. Center of Gravity 28". Overhang 3". Off-Center 38" Table. Backlash Control and "Zero" Indicator on Control. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Serial #869. This Machine is in Very Good Condition and is Available with an Integrated Robotic Manipulator System Robotic Positioner Only Complete Robotic System.
1 ea RP210001 ABB Model MTA-1600A 3,500Robotic Head/Tailstock. With MHA-1600L-M93 Servo Drive Control Cabinet. Head/Tailstock S/N 642-352-9033. Cabinet S/N 489727-880. Good Condition.
1 ea RP210002 ABB Model MTA-1600A 3,500Robotic Head/Tailstock. With MHA-1600L-M93 Servo Drive Control Cabinet. Head/Tailstock S/N 642-352-9031. Cabinet S/N 489727-880. Good Condition.
1 ea RP004001 ABB/Esab Orbit 160B, Robotic Positioner. Two Station Articulating Positioner, for Load & Weld Station. 353 lbs Each Side, Table Rotation 90 Deg. in 2.7 Sec. Or 360 Deg. in 6.8 Sec., Tilting Arm: Turning Speed 0 to 11.8 RPM, Indexing 90 Deg. 2.7 Sec., 360 Deg. 7.2 Sec., Station Interchange 3.5 Sec. This unit was integrated to ABB/Esab a IRB 6L2 Robot. Pos. Ser.#414 441 9034, Cont. 443 440 9005.
1 ea RP004002 ABB/Esab Orbit 160B, Robotic Positioner. Same as Above. Pos. 414 437 9367, Cont. 404 436 9060.
1 ea RP006001 Motoman Koike-Aronson "Dual" 1000 lb Head/Tailstock Positioner. Model RHS-5SD Headstocks & RTS-5 Tailstocks with Servo Drives set up for Load/Weld Stations. Speed Range is Zero to 10 RPM, 18" Dia. X 1" Thick Tables, 144" Between Faceplates, Ctr. of Rotation 48" from floor. 1996 "Like New" Condition Lot.
1 ea RP207001 Preston-Eastin Model DEPA-30FB Robotic Positioner. . Two Station Articulating Positioner, for Load & Weld Station. 3,000 lb Capacity @ 6" C.G. Each Side. Fixed Table Height of 48" with the Table Flat. 43" x 43" Square Work Tables. Servo Drive that can be Installed on any Robotic System with the Proper Relays. "1996" Serial #DEPA-30FB-187 Very Good Condition.
We have been chosen by Motoman Robotics to be their official
distributor of their original mig gun parts and robot torch consumables.
We have a large inventory of hard to find Motoman Robotic Torch consumables in stock. We have both the full line or original water cooled
as well as air cooled Motoman robot mig torches.
