Weld positioners all sizes types by Aronson, Ransome, Jetline, Pandjiris and Worthington welding positioners.


Reconditioned used weld positioners that are refurbished to like new condition. We also inventory new welding positioners, pipe gripper chucks, headstocks and tailstocks, weld positioner. We carry a large selection
of welding positioning equipment. If you are looking for a positioner for
rent or sale please contact us.

All of our used positioners are available for rental or purchase.
We rent welding positioners by the month or longer periods. All new
and reconditioned used weld positioners are in stock in Cincinnati, Ohio.


Weld Positioners

CURRENT INVENTORY OF NEW POSITIONERS & CHUCKS

Any MBC BP 2A M.B.C. Model BP-2-A, 200 lb Bench Top Positioners. These are "New" machines. Capacity 200 lbs balanced load in the horizontal position, 100 lbs in the vertical. 12" dia. slotted faceplate. Variable Speed Rotation, H.F. Protected, On/off Foot Switch, Manual Handwheel Tilt, 115 volt. Available with 3-Jaw 9" Quick Lever Chuck.  New"

Any MBC BP 2B "NEW" M.B.C. Model BP-2-B, 200 lb Bench Top Positioners. 0-9 RPM Capacity 200 lbs balanced load in the horizontal position, 100 lbs in the vertical. 12" dia. slotted faceplate. Variable Speed Rotation, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New" Available with 3-Jaw 9"

Any MBC BP SB "NEW" M.B.C. Model BP-SB, 100 lb Bench Top Positioners. 0-18 RPM Capacity 100 lbs balanced load in the horizontal position, 50 lbs in the vertical. 12" dia. slotted faceplate. Variable Speed Rotation, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New" Available with 3-Jaw 9" 

Any MBC R2 Model R2, 200 lb Bench Top Positioners with a 2" thru hole design with optional AGP- 2 Though Hole Purge. These are "New" welding positioner in stock. Capacity 200 lbs balanced load with the the part in the horizontal position, table vertical. 100 lbs with the part in the vertical position weld table flat. 13" dia. slotted faceplate 5/16th thick with 2" thru hole. Variable Speed Rotation 0-6 RPM, 102 in lb torque, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New"  Available with 3-Jaw 9" 

1 ea P702010 Atlas Model 200 Positioner. 200 lb capacity with the table in the horizontal position. 130 degree manual tilt. Variable speed rotation from 2.4 to 9.5 RPM. 10" diameter table with slots. 200 amp ground capacity. On/off foot pedal. Serial #4551 Good Condition 

1 ea P704017 Jetline Model ZB-200A Positioner. 200 lb Capacity @ 4" C.G., 135 degree manual tilt in 15 degree increments. Variable speed rotation from .2 to 10 RPM., 200 amp ground capacity. Includes a 4" Capacity 3-jaw self centering chuck and an on/off foot pedal. Serial #900831 Good Condition

Any PRE PA2MT "NEW" Preston-Eastin 250 lb Positioner. 250 lb Capacity @ 2" C.G., Variable Speed Rotation from .27 to 6.9 RPM. 135 Degree Manual Hand Wheel Tilt. 16" Diameter Table with Slots. On/Off Foot Pedal. 115 Volt. Brand New – Ready to Ship! 

Any PRO WP250 "New" Profax 250 lb Positioner. 250 lb Capacity @ 4" C.G., 0 to 90 Degree Manual Hand Wheel Tilt. Variable Speed Rotation from 0.0 to 5.5 RPM. 13.75" Diameter Table with Slots and a 1" Diameter Thru Hole. High Frequency Protected. On/Off Foot Pedal. 115 Volt Brand New – Ready to Ship !

Any PAN MP Pandjiris "NEW" Mini Pro 300 lb Bench Top Positioner. 300 lb Horizontal Capacity, 200 lb Vertical Capacity. Variable Speed from .37 to 13.0 RPM. 0 to 90 Degree Manual Pin Lock Tilt in 15 Degree Increments. 8" Diameter 3-Jaw Self Centering Chuck with a 2.5" Thru Hole. On/Off Foot Switch. 115 Volt. Brand New – Ready to Ship!

1 ea P411006 WMP 300 lb Positioner. 300 lb Load Capacity. Constant Speed Rotation. 90 Degree Manual Tilt. 24" Fixed Height. 18" Diameter Table w/ Slots. On/Off Foot Pedal. 230/460 volt. Serial # N/A As Is Only!! – Good Working Condition

1 ea P994007 Standard Machine Co. Positioner. Approx. 400# Capacity Power Hyd. Tilt, Variable Speed Rotation. 13" Dia. Table w/ Slots. Fixed Height of 26" Ctr. line of Rotation. AS IS ONLY

Any PRO WP500 "NEW" Profax 500 lb Positioner. 500 lb Capacity @ 6" C.G., 135 Degree Power Tilt. Variable Speed Rotation from 0.4 to 4.0 RPM. Fixed Table of 25.25". 19.5" Round Table with Slots. 300 Amp Rotary Ground Forward/Reverse Momentary Foot Pedal. 115 Volt Brand New – Ready to Ship

1 ea P610007 Ransome 5P 500 lb Positioner. 500 lb Capacity @ 6" C.G., Manual Hand Wheel Tilt. Mechanical Variable Speed Rotation from .05 to 2.0 RPM. 15" Diameter Round Table. Manual Adjustable Height from 28" to 46" in 5" Increments. Pendant Control. On/Off Foot Pedal. 230/460 Volt. Serial #56561 Good Condition

1 ea P407002 Pandjiris Alpha 5-V8 Positioner. 500 lb cap. @ 3" C.G., 90 Degree Manual Tilt with Pin Locks in 12.5 Degree Increments. Variable Speed Rotation from .27 to 6.70 RPM. 20.5" Fixed Height to the Center of the Rotational Axis. 18" Diameter Round Table w/ Slots. On/Off Foot Pedal. Serial #800-2073-2 Good Condition

1 ea P9911008 Aronson BT-500A Welding Positioner. 500 lb Cap. Variable Speed, Manual Side Arm Tilt, 8" Dia. 3-Jaw Chuck, Needs Vert. Mtg. Pipe. Foot Controls, Ser.#77785 Good Condition

1 ea P205004 Jetline Model ZB-500A Positioner. Capacity of 500 lbs @ 4". Variable Speed Rotation. Manual Hand Wheel Tilt. 24" Diameter Table. Good Condition

1 ea P409001 Ransome/Worthington 5P Positioner. 500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .05 to 2.0 RPM. Manual Adjustable Table Height from 32-1/2" to 50-1/2". On/Off Foot Pedal. Includes a 12" Capacity 3-Jaw Self Centering Chuck. Serial #54055 Good Condition

1 ea P510015P Ransome 5P 500 lb Positioner. 500 lb Capacity @ 6" C.G., Manual Hand Wheel Tilt. Mechanical Variable Speed Rotation from .05 to 2.0 RPM. 26" Diameter Round Table. Manual Adjustable Height from 36.5" to 51.5" in 5" Increments. Pendant Control. 230/460 Volt. Serial #56568 "As-Is" Condition

1 ea T309002 Kistler / Pandjiris Model U-150 / U-150H Pipe Positioner with Clamping Roller System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Good Condition

Any PRO WP1000 "NEW" Profax 1,000 lb Positioner. 1,000 lb Capacity @ 6" C.G., 135 Degree Power Tilt. Variable Speed Rotation from 0.2 to 2.0 RPM. Fixed Table of 33.75". 24.5" Round Table with Slots. 500 Amp Rotary Ground Forward/Reverse Momentary Foot Pedal. 115 Volt Brand New – Ready to Ship

1 ea P411003P Aronson HD10B-PTVR2 Positioner. Capacity 1,000 lbs @ 6" C.G. Variable Speed Rotation from .07 to 2.0 RPM. With a 10 Turn Potentiometer. 135 Degree Power Tilt. Manual Adjustable Heights of 24", 32" and 39". 24" Diameter Round Table with Slots. Pendant Control. Serial #75326 Very Good Condition

1 ea P408001 Teledyne Readco Model UPC-10 Positioner. 1,000 lb Capacity @ 6" C.G.. Power Tilt, Variable Speed Rotation from .040 to 2.0 RPM. Manual Adjustable Table Height from 25" to 49" in 6" Increments. 29" Round Table with Slots. Pendant Control. On/Off Foot Pedal. Serial #104199 Good Condition 

1 ea P305004 Teledyne Readco Model UPC-10 Positioner. 1,000 lb Capacity @ 6" C.G.. Power Tilt, Variable Speed Rotation from .040 to 2.0 RPM. Manual Adjustable Table Height from 25" to 49" in 6" Increments. 26" Round Table with Slots. Pendant Control. Serial #107450 Good Condition

1 ea P605016 Teledyne Readco Model UPC-10 Positioner. 1,000 lb Capacity @ 6" C.G.. Power Tilt, Variable Speed Rotation from .040 to 2.0 RPM. Manual Adjustable Table Height from 25" to 49" in 6" Increments. 29" Round Table with Slots. Pendant Control. On/Off Foot Pedal. Serial #104902 Good Condition

1 ea P603006 Ransome 10P Positioner. 1,000 lb Capacity @ 6" C.G. 135 Degree Power Tilt. Variable Speed Rotation from .05 to 2.0 RPM. Manual Adjustable Table Height from 32.5" to 50.5" in 6" Increments. Pendant Control. Forward / Stop / Reverse Foot Pedal. 16" Diameter Self Centering Scroll Style Chuck. 230 Volt 3-Phase. Serial #149136 Good Condition

1 ea P305001 Ransome SW-10A Twin Axis Positioner. 1,000 lb Capacity @ 6" C.G.. 360 Degree Constant Speed Powered Side Arm Tilt. Variable Speed Rotation from .06 to 2.0 rpm. 36" Diameter Table with Slots. On/off Foot Pedal. 115 Volt. Serial #9321389 Good Condition

PAN 15 4FB "NEW" Pandjiris 1,500 lb Positioner. 1,500 lb Capacity @ 4" C.G., 135 Degree Manual Hand Wheel Tilt, Variable Speed Rotation from .08 to 1.60 RPM. 23-1/4" Fixed Table Height. 24" Square Table with Slots. 25' Pendant Control. 115 Volt. PROUDLY MADE IN THE U.S.A. NEW !! 

PAN 15 4AB "NEW" Pandjiris 1,500 lb Positioner. 1,500 lb Capacity @ 4" C.G., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .08 to 1.60 RPM. Manual Adjustable Table Height from 23-1/2" to 37-1/2" in 7" Increments. 24" Square Table with Slots. 25' Pendant Control. 115 Volt. PROUDLY MADE IN THE U.S.A. NEW !

1 ea P406003 Koike Aronson HD-25MTFB, 2,500 lb Positioner. 2,500 lb Capacity @ 6" C.G., Manual Tilt, Powered Variable Speed Rotation by a Graham Drive System. Fixed Table Height of 34". On/Off Pendant Control. Serial #67914 Good Condition

1 ea P503003 Koike-Aronson GE-25A 2,500 lb "Geared Elevation Positioner". Same As Above. Serial #9642 Excellent Condition

1 ea P503004 Koike-Aronson GE-25A 2,500 lb "Geared Elevation Positioner". Same As Above. Serial #9535 Excellent Condition

1 ea P510009 Koike-Aronson HS10BBH/T3-30 "Skyhook" Positioner. 2500 lb Load Capacity. Center of Gravity 28". Overhang 3". Off-Center 38" Table. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Pendant Control. Serial #80308 Good Condition

1 ea P510010 Koike-Aronson HS10BBH/T3-30 "Skyhook" Positioner. 2500 lb Load Capacity. Center of Gravity 28". Overhang 3". Off-Center 38" Table. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Pendant Control. Serial #N/A Good Condition

1 ea P304009 Cullen- Friestadt Model 25, 2500 lb Positioner. 2500 lb cap. @ 6" C.G.. Variable Speed Rotation by Hand Wheel, Power Tilt,. Manual Adjustable Table Height. 30" Square Table Pendant Control for Stop Start. Serial # 1090 In Working Cond. AS IS ONLY

1 ea P211008 Cullen-Friedstadt Model 25 Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt,Variable Speed Rotation. Manual Adjustable Height from 36" to 60" in 6" Increments. 40" Square Table with Slots. Not in Working Condition, As Is Only!

1 ea P704014 Cullen- Friestadt Model 25, 2500 lb Positioner. 2500 lb cap. @ 6" C.G.. Variable Speed Rotation., Power Tilt,. Manual Adjustable Table Height. 30" Square Table Pendant Control. On/off foot pedal. Serial # 1478 In Working Condition. AS IS ONLY!.

1 ea P410003 Heinrichs Gluck H75 "Powered Elevation" Positioner. 2,500 lb Capacity @ 12" C.G., Power Tilt, Variable Speed Rotation. 40" to 64" Power Elevation. 24: Square Table. On/Off Foot Pedal. Serial #D20062740 Good Condition 

1 ea P609001 Ransome Model 25P Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .031 to 2.0 RPM. 40" Square Table. Manual Height Adjustment from 45-1/2" to 57-1/2. Pendant Control. Serial #N/A Good Condition

1 ea P003007 Ransome 25P, 2500 lb Positioner. Power Tilt, Electric Variable Speed Rotation, 34" Dia. Table. Foot Switch, Single Post Design with Height Adjustments., Ser.# 637 Good Condition

1 ea P606003 Ransome Model 25P Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .031 to 2.0 RPM. 32" Square Table. Fixed Height of 38" to Center of the Rotational Axis. Pendant Control. Serial #7028. Good Condition

1 ea P404001S Ransome Model 25P Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation. Manual Adjustable Height from 36-1/2" to 60-1/2" in 6" Increments. 30" Round Table with Slots. Pendant Control. On/Off Foot Pedal. Serial #1630532 Very Good Condition

1 ea P406002 Webb 25P, 2,500 lb Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, .15 to 1.5 Variable Speed Rotation. 36" Fixed Table Height. 30" Diameter Round Table with Slots. Pendant Control. Serial #N/A Good Condition

1 ea WS404002 Ransome/Lincoln Gear/Flange Welding System. System Includes a Ransome Model 25P-A, 2,500 lb Cap. @ 6" C.G., Power Tilt, VS Rotation from .038 to 1.55 RPM, Manual Elevation from 34.5" to 58.5" in 6" Increments, Ser. #1630532. System also Includes a Lincoln DC-600 Power Supply with a NA-5 Control and a NA-5R Mig Welding Head. Mig Gun Mounts on a Air Actuated Pivot that also Carries a Welding Shield into Place. A Fully Automatic System for Welding of Gears or Pipe Flanges. Good Condition 

1 ea P410004 Ferguson 16/2-F475-270 Pipe Rotator with Clamping Roller System. 3,000 lb Load Capacity. 3" to 20" Diameter Capacity. Variable Speed Pipe Rotation by a Set of 12" Diameter Steel Wheel Turning Rolls with a Hold Down Devise. Turning Rolls are Mounted on a Constant Speed Side Arm Table that has 360 Degree Power Rotation. A Unique System for Welding Off Set Pipe and Pipe Elbows in Any Position. Serial #61418 Good Condition

1 ea P612005 Pandjiris 30-6AB Positioner. 3,000 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .07 to 1.40 RPM. Manual Height Adjustment from 33" to 53" in 4" Increments. 30" Square Table. Pendant Control. Forward/Stop/Reverse Foot Pedal. Serial #400-9268 Good Condition

PAN 30 6FB "NEW" Pandjiris 3,000 lb Positioner. 3,000 lb Capacity @ 6" C.G.., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .07 to 1.40 RPM. 32-5/8" Fixed Table Height. 30" Square Table with Slots. 25' Pendant Control. 230/460 Volt. PROUDLY MADE IN THE U.S.A. NEW 

PAN 30 6AB "NEW" Pandjiris 3,000 lb Positioner. 3,000 lb Capacity @ 6" C.G., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .07 to 1.40 RPM. Manual Adjustable Height from 33" to 53" in 4" Increments. 30" Square Table with Slots. 25' Pendant Control. 230/460 Volt. PROUDLY MADE IN THE U.S.A. NEW !

1 ea P703005 Ransome Model 1.3 3,000 lb Positioner. 3,000 lb capacity at 12" C.G., 135 degree power tilt. Variable speed rotation from .031 to 1.2 RPM. 40" square table w/ slots. Fixed table height of 51". Pendant control for all functions. Serial #4502 Good Condition

1 ea P611020 Aronson Model HS30GE/T4-62 Sky Hook Positioner. 4,000 lb Capacity @ 36" C.G. Off of the Turntable Face. 62" Clearance from Center of Turntable. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Pendant Control. Serial #7914 Good Condition

1 ea P511004 Koike Aronson GE-45B, 4,500 lb "Geared Elevation" Positioner. 4,500 lb Capacity @ 12" C.G., Power Tilt, Variable Speed Rotation from .03 to 2.0 RPM by a 10 Turn Potentiometer. 33" Constant Speed Powered Geared Elevation from 52-3/4" to 85-3/4" .48" Diameter Round Table with 9" Diameter Thru Hole. Pendant Control. Forward/Stop/Reverse Foot Pedal. Serial #7026. Good Condition

1 ea P705001P Custom 4,500 lb Positioner. 4,500 lb capacity @ 12" C.G.. 135 degree power tilt. Constant speed rotation. Fixed height of 40" to the center of the rotational axis. 48" square table. Pendant Control. As-Is Only

1 ea ARO HD45 "NEW" Koike-Aronson Model HD-45 4,500 lb Positioner. 4,500 lb capacity @ 12" C.G., 135 degree constant speed power tilt, Variable speed rotation from .04 to 1.2 RPM, Manual adjustable table height from 34.5" to 54.5" in 5" increments. 36" square table with slots. Pendant control for all functions. 230/460 volt,3-phase. NEW!!

1 ea PAN 45 12AB "NEW" Pandjiris 4,500 lb Positioner. 4,500 lb Capacity @ 12" C.G., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .03 to .97 RPM. Manual Adjustable Height from 39" to 57" in 4-1/2" Increments. 48" Square Table with Slots. 25' Pendant Control. 230/460 Volt PROUDLY MADE IN THE U.S.A. NEW

1 ea P704009 P & H 5,000 lb Positioner. 5,000 lb capacity @ 12" C.G.., 135 degree power tilt. Variable speed rotation by a sheave drive. 36" diameter round table. Manual adjustable height from 40" to 64" in 4" increments to the center of the rotational axis. Pendant Control. Serial #N/A AS IS ONLY!

1 ea P610006 Cullen Friestedt Model 60 Positioner. 6,000 lb Capacity @ 12" C.G., Power Tilt, Variable Speed Rotation. Manual Adjustable Height from 53" to 62". 48" Square Table with Slots. Pendant Control. Serial #518 Good Condition

1 ea P504001P Koike-Aronson Model RAB-60 Positioner. 6,000 lb Cap. @ 12" C.G.. 135 Degree Power Tilt. Variable Speed Rotation from .05 to 1.50 RPM. Anti-Backlash Dual Pinion on Rotation. Manual Adjustable Table Height from 44-1/2" to 74-1/2" in 6" Increments. 48" Square Table with Slots. Pendant Control. Serial #826. Very Good Condition

1 ea ARO HD60 "NEW" Koike-Aronson Model HD-60 6,000 lb Positioner. 6,000 lb capacity @ 12" C.G., 135 degree constant speed power tilt, Variable speed rotation from .05 to 1.5 RPM, Manual adjustable table height from 44.5" to 74.5" in 6" increments. 48" square table with slots. Pendant control for all functions. 230/460 volt,3-phase. NEW!!! - IN STOCK

1 ea GEN PT3000 "NEW" Gentec Model PT-3000 6,600 lb Positioner. 6,600 lb Capacity @ 11.8" C.G.. 135 Degree Power Tilt, Variable Speed Rotation from 0.1 to 1.0 RPM. Fixed Height of 43" with the Table Flat. 39" Round Table with Mounting Slots. 800 amp Grounding Capacity. Hand Pendant Control. On/Off Foot Control. 230/460 Volt 3 Phase. NEW in Stock!! Ready to Ship !

1 ea ARO HD100 "NEW" Koike-Aronson Model HD-100 10,000 lb Positioner. 10,000 lb capacity @ 12" C.G., 135 degree constant speed power tilt, Variable speed rotation from .04 to 1.0 RPM, Manual adjustable table height from 44.5" to 66.5" in 6" increments. 48" square table with slots. Pendant control for all functions. 230/460 volt,3-phase. NEW!!! - IN STOCK !

1 ea GEN PT5000 "NEW" Gentec Model PT-5000 11,000 lb Positioner. 11,000 lb Capacity @ 11.8" C.G.. 135 Degree Power Tilt, Variable Speed Rotation from 0.04 to 0.8 RPM. Fixed Height of 47" with the Table Flat. 47" Round Table with Mounting Slots. 800 amp Grounding Capacity. Hand Pendant Control. On/Off Foot Control. 230/460 Volt 3 Phase. NEW in Stock!! Ready to Ship  

1 ea RP309001P Koike-Aronson "1994" Model #RDCG/T6-100/26SD "Drop-Center" Positioner. Tilt Capacity of 6600 lbs @ 24" from the table, or 4000 lbs @ 57", or 2000 lbs @ 90"!!. Rotation Capacity of 6600 lbs @ 20" Center of Gravity off of the centerline of rotation. Both Tilt and Rotation Axis have AdjustableAnti-Backlash Dual Pinions on Bull Gears! Both Axis are Servo Drive Variable Speed with Encoders and Resolvers. 360 deg. Rotation @ 0.0-2.0 RPM, 200 deg. Tilt @ 0.0-1.75 RPM. (This Servo Drive Positioner can be converted to a Manual Pendant Operated Machine). Table is 48" x 48" with Hydraulic Master Clamping System for Slave Pallet Mounted Tooling 1 ea slave included. Note; "Drop Center Positioners" are typically used for work pieces with longer Center of Gravity distances from the table, resulting in lower working or welding heights than using higher capacity positioners. This 1994 Machine has NEVER BEEN USED! Brand New Condition!

1 ea P506002 Aronson Model HD-240, 24,000 lb Positioner. Capacity 24,000 lbs @ 12" from Table, 12" Eccentric Rotation. 135 Degrees of Power Tilt, Variable Speed Rotation by AC Inverter w/Pendant Control. 54" X 54" square Table w/ 4 Slots. Manual Adjustable Height Base. Ser. #74111 Good Condition

1 ea P403001 Pandjiris Model 250 MVRMT-VPL, 25,000 LB – "Power Elevation" Positioner. Capacity 25,000 lbs @12 " from Kingpin. Variable Speed Rotation of .04 to .40 RPM by DC Drive, 135 Degrees of Power Tilt, Power Elevation of Table Height from floor of 68" to 90" at a Constant 15 IPM, Remote Pendant Control for All Functions. 72" x 72" Table with 4 1-1/8" Tee Slots. Ser. #25-3779-4 Very Good Condition.

1 ea P204001 Ransome 400P, 20 Ton Positioner. Capacity 40,000 lbs @ 12" Center of Gravity. Variable Speed Rotation by SCR Electronic HF Protected Drive. Rot. Torque 480,000 lb/in, 135 deg. Power Tilt by 7-1/2 HP AC Brakemotor, Tilt Torque 940,000 lb/in. 84" diameter Table w/Tee Slots. Adjustable Height Base. Remote Pendant Controls, Ser. #2413698, 1971, Very Good Condition

1 ea P10301P Ransome 400P, 20 Ton Positioner. Capacity 40,000 lbs @12" Center of Gravity. Variable Speed Rotation by SCR Electronic HF Protected Drive. Rot. Torque 480,000 lb/in, 135 deg. Power Tilt by 7-1/2 HP AC Brakemotor, Tilt Torque 940,000 lb/in. 84" diameter Table w/Tee Slots. Adjustable Height Base. Remote Pendant Controls, Ser. #2428309, 1981, Excellent Condition

1 ea P209005 Aronson Model G400A Positioner. 40,000 lb Capacity @12" C.G.. 90 Degree Power Tilt. Variable Speed Rotation. Fixed Base. 96" Square Table with Slots. 80" Height to Center of Rotational Axis. Pendant Control. Serial #6913 Good Condition

1 ea P702005P3 GE-500 Aronson Geared Elevation Three Axis Satellite Positioner Features: 3 axes of powered movement. Variable Speed Rotation with 10 turn potentiometer for speed control. 360 degrees rotation, 600,000 lb/in of rotation load torque.Variable Speed Tilt with 10 turn potentiometer for speed control, 135 degrees of movement from flat to past vertical, 1,050,000 lb/in of tilt load torque. Constant Speed Lift, 33" of movement in elevation change. 50,000 lbs capacity rated at 12" off centerline rotation or distance of overhung load, 62" diameter faceplate, Machined flat surface, 8-3/4" inherent overhang from tilt centerline. 12" diameter thru-hole in faceplate, Offers easy access for cabling, fixturing etc. through the center of faceplate. White Epoxy Paint. Limit Switches to prevent overtravel in all axes. 460 V, 3 phase. Unit was new in 1984. Additional options available upon request !

1 ea P501001 Aronson Model #GE-500FBCS 50,000 lb Positioner. 50,000 lb Capacity @ 12" C.G., Constant Speed Power Tilt. Constant Speed Rotation of .50 RPM. Fixed Table Height of 80-1/2" with the Table Flat, 70-1/2" to the Center of the Rotational Axis. 84" Square Table with a 12" Diameter Thru Hole. Pendant Control for all Functions. Serial #612 Good Condition

1 ea P209006 Aronson Model G500 Positioner. 50,000 lb Capacity @ 12" C.G.. 90 Degree Power Tilt. Variable Speed Rotation by AC Inverter Drive. Fixed Base. 84" Square Table. 80" Height to Center of Rotational Axis. Serial #662 Good Condition

1 ea P001011 Aronson GE-1200-EXP, "1995" 120,000 lb Positioner. This Unique Positioner was Specially Designed by NASA to Assemble and "Float on Built-In Air Pads" a 2 Billion Dollar Spacecraft that was Launched in late December 1999. The Special Features are Numerous and can be seen on our Space Website www.wpi-space-satellite.com or call Paul Rensing.

UNIVERSAL BALANCE POSITIONERS

1 ea P604007 Koike-Aronson C-500 Universal Balance Positioner. 500 lb Capacity @ 12" from the Table. 360 Degree Manual Rotation. Adjustable Height from 27" to 37". 6" Diameter Work Table. These are Manual Balanced Machines – They are Typically used for Weldments that Require Quick Re-Positioning Such as Boxes, Frames, etc., Serial #R942 Good Condition

1 ea P604013 Koike-Aronson C-500 Universal Balance Positioner. 500 lb Capacity @ 12" from the Table. 360 Degree Manual Rotation. Adjustable Height from 27" to 37". 6" Diameter Work Table. These are Manual Balanced Machines – They are Typically used for Weldments that Require Quick Re-Positioning Such as Boxes, Frames, etc., Serial #601127 Good Condition

 


tj20 pipe chuckPandjiris Gripper Chuck
.

GRIPPER WELDING PIPE CHUCKS

PAN TJ-20 NEW Model TJ-20 Quickset Gripper Chuck. Clamping Diameter. Outside 1" to 16-1/2", Inside Clamp. 6-1/4" to 20", Quick-Set of 3-Jaws w/Pins. Mounting not Included

PAN MOD-A NEW Model "A" Quickset Gripper Chuck. Clamping Diameter. Outside 1-1/2" to 27-5/8", Inside Clamp. 5-1/2" to 31-1/4". Quick-Set of 3-Jaws w/Pins. Mounting Not Included

PAN MOD-B NEW Model "B" Quickset Gripper Chuck. Clamping Diameter. Outside 1-1/2" to 40-3/4", Inside Clamp. 5-1/2" to 44-3/8". Quick-Set of 3 Jaws w/Pins. Mounting Not Included

PAN MOD-B-60 New Model "B-60" Quickset Gripper Chuck. Clamping Diameter. Outside 1-1/2" to 63-7/8". Inside 7" to 68". Quick-Set of 3 Jaws w/Pins. Mounting Not Included


All of the above listings of the weld positioners above have pictures
and can be seen by placing the part number in the search window below.
Or if you wish to see the complete list of weld positioner pictures visit
the weld positioners photo page weld positioner pictures Weld Positioner Pictures


Call 800-288-9414 and ask for 
Pete, Melissa, Todd, Tom or Dennis

If you have any questions, Please email Us
weldplus@weldplus.com


Product Pictures CWT arc welding monitors Web Pages
Home | About Us | Automation | Circumferential Welders | Contact Us
Cutting Machines
| EMail Us |
Our Inventory | Line Card
Metco
Manipulators | Miscellaneous Equipment | Head-Tail Stocks
Positioners | Planishers | Product List | Rental Equipment
Search Site
| Seamers | Turning Rolls | Turntables | Used Welders
Vendor Links
| Sale Items | New Arrivals |
Surplus Mig Gun Parts


To Search our database of used products pictures, please enter a part number
or product name. Like turntables, positioners, manipulator, turning rolls, seamers, etc.



Weld Plus Inc.   4790 River Road.   Cincinnati, Ohio 45233
1.800.288.9414 Toll Free    1.513.941.4411 Phone    1.513.467.3585 Fax

sales@weldplus.com

Send mail to webmaster@weldplus.com with questions or comments about this website.
Weld Plus Inc. Welding News
Last modified:


Copyright © 1996-2008 Weld Plus Inc.