1 ea JET LWS36 "NEW" Jetline Model LWS-36 36" GTAW Longitudinal Seam Welding Package. 42" Total Clamping/Welding Length. Minimum Part Diameter Capacity of 3.25". Maximum Part Diameter Capacity of 32" (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300 Tig Welding Package that Includes a Water Circulator and 500 amp Tig Torch.
1 ea JET LWS48 "NEW" Jetline Model LWS-48 48" Longitudinal GTAW Seam Welding Package. 54" Total Clamping/Welding Length. Minimum Part Diameter Capacity of 3.25". Maximum Part Diameter Capacity of 32" (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300 Tig Welding Package that Includes a Water Circulator and 500 amp Tig Torch.
1 ea JET LWS60 "NEW" Jetline Model LWS-60 60" Longitudinal GTAW Welding Seamers Package. 66" Total Clamping/Welding Length. Minimum Part Diameter Capacity of 5.25". Maximum Part Diameter Capacity of 32" (Can be Increased with a Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6 Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300 Tig Welding Package that Includes a Water Circulator and 500 amp Tig Torch.
RECONDITIONED USED LONGITUDINAL WELDING SEAMERS
1 ea S209001 Jetline 6" Custom Weld Seamer. 1997
Variable Speed Jetline Carriage on a Jetline Model TKS-24 Side Beam
with 24" Travel. Currently Has a Total Clamping Length of 6"
(Can be Increased with a New Clamping Fixture to a Length of 24"
to Match Side Beam). 3" Vertical and Horizontal Cross Slides and
a Rotary Slide. No Welding Equipment!! Serial #970295 Good
Condition
1 ea S209003 Jetline 6" Custom Weld Seamer. 1997
Variable Speed Jetline Carriage on a Jetline Model TKS-24 Side Beam
with 24" Travel. Currently Has a Total Clamping Length of 6"
(Can be Increased with a New Clamping Fixture to a Length of 24"
to Match Side Beam). 3" Vertical and Horizontal Cross Slides and
a Rotary Slide. Complete with Plasmfix 50S Plasma Welding Power Supply
and Miller Water Circulator. Serial #970299 Good Condition
1 ea S604011 "1990"Mills Machine 11" Longitudinal
Plasma Seam Welder. 11" Overall Welding / Clamping Length
Capacity. 3-1/2" to 5-1/2" Diameter Capacity ( Can be
Increased with a Riser ). Variable Speed Screw Driven Carriage.
3" Pneumatic Torch Lifter. Gas Purge Back p Bar, Water Cooled
Mandrel, Dual Water Circulators. Plasma Welding Equipment Includes a
Thermal Dynamics WC100B Welding Console, Airco Heliwelder Power Supply
and Multi Slope 2 Sequence Control, Model 3A Plasma Torch and a
Cyclomatic 80A Magnetic Welds Oscillator. Serial # N/A Good
Condition
1 ea S502007 Jetline 12" Coil End Joining Seam Welder.
This seam welders primary use is to join together strips fed from
coils. The Jetline Seamer Clanping/Welding bed is 12-1/2" long.
Has a Variable Speed Carraige with #9026 Control and two manual cross
slides on the torch holder. The one piece hold down clamps are air
actuated with individual air valves. There are 2 ea 8" dia.
primary strip guide rolls and 2 ea 3" final guide rolls. The
Welding Package is a Miller 50A Precision Tig Welding Power Supply and
and Air-Cooled Tig Torch for the fusion only weld. The whole system is
mounted on a self contained portable base. Dimensions of the whole
system are 78" lg. x 40" w x 58" h. Jetline Ser. 84166.
Very Good Condition
1 ea S412001 Cecil Peck "Dual Position" Outside Corner
Seam Welder. This Machine was Used to Tig Weld the Outside Corners
of Aluminum, Steel and Stainless Electric Panel Boxes. The Dual
Operator Positions were Used for Weld Lengths up to 17" Long. The
Air Clamping Device and Copper Mandrel Plates Could be
Increased (Within Reason) for Longer Welds. The Torch Carriers are
Heavy Duty Variable Speed Devices that are ½ H.P. Dc Motors &
Drives. Reconditioned with 2 Cold Wire Feeders or Converted to
Mig Welding Including Power Sources
1 ea S502002 Pandjiris Model 24E-3-5-30 24" Weld Seamer. 30"
Total Clamping / Welding Length. 3-1/4" Minimum Parts Diameter,
32" Maximum Parts Diameter ( Can be Increased with a Riser ).
Rack and Pinion Drive Variable Speed Carriage. Water Cooled Mandrel.
Plate Alignment Devices. Jetline Model 9029 Cold Wire Feeder and Model
9033 Pulse Control. Power Supply NOT Included. Serial #400-9364. Good
Condition
1 ea S10302 Jetline LWS-24Z, High Production , Automatic
Seamwelder. This 1996 Automatic Plasma Welding Seamwelder is a
High Production Machine that Features: Automatic Clamping &
Alignment for Cylinders up to 24" long , 18" to 25" in
diameter, and .020 to .187 Thickness, Microprocessor Control, Thermal
Arc Ultima 150 Plasma Welding System, Safety Palm Buttons &
Guards, and More! Minimum Operator Skill Required, This machine was
used for a short run product. Very Low Hours, Excellent Condition
1 ea S701001 Jetline Model LWS-24 24" Seam Welder. 30"
total welding/clamping length capacity. 2-1/2" minimum part
diameter. 32" maximum part diameter (can be increased with a
riser). Gas purge back up bar. Variable speed rack & pinion driven
carriage with a model #9027 carriage control. Welding equipment NOT
included. Serial #81308 Good Condition
1 ea S601013 Jetline Model LWS-36 36" Weld Seamer. 42"
Total Clamping/Welding Length. 3" Minimum Part Diameter Capacity.
32" Maximum Part Diameter (Can be Increased with a Riser).
Includes a Jetline Model 9027 Variable Speed Carriage Control, 9028
Weld Sequencer and 9029 Cold Wire Feeder. 1" Air Torch Lifter.
Plate Edge Alignment Devices. Serial #8324 Good Condition
1 ea S501001 Jetline LWX-36 "Ultra Precision"
Longitudinal Seam Welder. 42" Total Welding/Clamping Length.
Minimum Part Diameter Capacity of 3.25", Maximum Part Diameter
Capacity of 32" (Can be Increased with a Riser). Welds Material
from .005 to 3/8" Thick. Gas Purge Back-up Bar. Continuous Copper
Hold Down Fingers. Welding Equipment NOT Included. Serial #7571 Good
Condition
1 ea S612003 Pandjiris Model 36ES-30 36" Seam Welder. 42"
Welding/Clamping Length Capacity. 3" Minimum Part Diameter.
30" Maximum Part Diameter ( Can be Increased with a Riser ).
Variable Speed Rack and Pinion Driven Carriage. Water Cooled Mandrel.
6" Manual Cross Slides. Serial #400-9160 Good Condition
1 ea S608005 Hamilton Custom 48" Weld Seamer. 52"
Welding/Clamping Length. 6" Minimum Part Diameter. 58"
Maximum Part Diameter Capacity. Air Clamping. Side Beam, Carriage
and Welding Equipment NOT Included. "AS IS" Condition.
1 ea S611012P Pandjiris Model 48E 4 weld Seamer, 54"
Welding/Clamping Length Capacity. 3.5" Minimum Part Diameter,
48" Maximum Part Diameter ( Can be Increased with a Riser ).
Variable Speed Rack and Pinion Driven Carriage. Water Cooled Mandrel
Serial #400-7869 Good Condition
1 ea S702011 Airline/Jetline LWS-48 Seam Welder. 54"
total welding/clamping length capacity. 4" minimum part diameter,
32" maximum part diameter (can be increased with a riser). Rack
and pinion driven variable speed carriage. Welding equipment NOT
included. Serial #1360 Good Condition
1 ea JET LWS36 "NEW" Jetline Model LWS-36 36"
Longitudinal GTAW seam Welding Package. 42" Total
Clamping/Welding Length. Minimum Part Diameter Capacity of 3.25".
Maximum Part Diameter Capacity of 32" (Can be Increased with a
Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable
Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6
Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300
Tig Welding Package that Includes a Water Circulator and 500 amp Tig
Torch. Brand New Ready to Ship
1 ea JET LWS48 "NEW" Jetline Model LWS-48 48"
Longitudinal GTAW seam Welding Package. 54" Total
Clamping/Welding Length. Minimum Part Diameter Capacity of 3.25".
Maximum Part Diameter Capacity of 32" (Can be Increased with a
Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable
Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6
Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300
Tig Welding Package that Includes a Water Circulator and 500 amp Tig
Torch. Brand New Ready to Ship
1 ea GEN LS12 "NEW" Gentec Model LS-12 4
Longitudinal Seam Welder. 51" Total Welding/Clamping Length
Capacity. .040 to 3/8" Thickness Capacity. 4" Minimum Part
Diameter. 30" Maximum Part Diameter. Variable Speed Rack &
Piniod Driven Carriage from 1.2 to 29 IPM. Pneumatic Torch Lifter.
Automatic Gas Purge System. Automatic Pneumatic Mandrel Clamping
Devise. Pneumatic Plate Alignment Devise. Automatic Finger Release.
Copper Gas Purge Back-up Bar. Welding Equipment NOT Included. NEW
IN STOCK !! Ready to Mount Your Welding Process
1 ea JET LWS60 "NEW" Jetline Model LWS-60 60"
Longitudinal GTAW seam Welding Package. 66" Total
Clamping/Welding Length. Minimum Part Diameter Capacity of 5.25".
Maximum Part Diameter Capacity of 32" (Can be Increased with a
Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable
Speed Carriage. Jetline Model 9627 Weld Sequence Control, ALC-401-6
Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300
Tig Welding Package that Includes a Water Circulator and 500 amp Tig
Torch. Brand New Ready to Ship
1 ea S410001P Jetline LWP-60, 60" Weld Seamer. 66"
Total Clamping/Welding Length. Minimum Parts Diameter of 5",
Maximum Parts Diameter of 33" ( Can be Increased with a Riser ).
Jetline Rack & Pinion Drive Variable Speed Carriage. Welding
Equipment Includes a Jetline CWF-10A Cold Wire Feeder, a Cyclomatic
AVC-2 Arc Length Control and a Miller Syncrowave 300 AC/DC Tig Welder.
This machine has an expensive factory option of a AFA 60
Quick-Set Automatic Finger Adjustment Assembly. Serial #81122 Good
Condition.
1 ea S701004P Jetline LWS-60 60" Seam Welder. 66"
Total Welding/Clamping Length. 6" Minimum Part Diameter.
32-1/2" Maximum Part Diameter. Water Cooled Mandrel. Variable
Speed Rack & Pinion Driven Carriage with a Model 9026 Carriage
Control. Welding Equipment NOT Included. Serial #80153 Good
Condition
1 ea S512003 Webb Model J-68 5 Seam Welder. 68"
total Welding/Clamping Length. 6" Diameter Minimum Capacity.
32" Diameter Maximum Capacity. .020 to .135 Thickness Capacity.
Water Cooled Mandrel. Includes a Lincoln TC-3 Variable Speed Travel
Carriage, Lincoln NA-5 or NA-3 Control and Head, Lincoln Vertical and
Horizontal Adjusters and Lincoln DC-600 Power Supply. 4"
Individual Copper Fingers, Copper Back-up Bar. Serial #59115 Good
Condition
1 ea JET LWS72 "NEW" Jetline Model LWS-72 72"
Longitudinal GTAW seam Welding Package. 78" Total
Clamping/Welding Length. Minimum Part Diameter Capacity of 6.0".
Maximum Part Diameter Capacity of 32" (Can be Increased with a
Riser). Gas Purge Back-up Bar. Plate Edge Alignment Devices. Variable
Speed Carriage. Jetline Model 9027 Weld Sequence Control, ALC-401-6
Arc Length Control, CWF-10B Cold Wire Feeder and a Miller Maxstar 300
Tig Welding Package with a Water Circulator and 500 amp Tig Torch. Brand
New Ready to Ship !
1 ea JET LWS72G "New" Jetline Model LWS-72 72"
Longitudinal Seam Welding Package. 78" Total Clamping/Welding
Length. Minimum Part Diameter of 6.0". Maximum Part Diameter
Capacity of 32" (Can be Increased with a Riser). Gas Purge
Back-up Bar. Plate Edge Alignment Devices. Variable Speed Carriage.
Jetline Model 9627 Weld Sequence Control. Ready to Mount Your
Welding Process !! Brand New Ready to Ship !
1 ea S609006 Pandjiris Model 72-ES-52 72" Seamer.
74" Total Welding / Clamping Length. 4" Minimum Part
Diameter. 48" Maximum Part Diameter. Equipped with a Variable
Speed Model OM-48 Carriage, Vertical and Horizontal Adjusters. Air
Actuated Torch Lifter. Spatter Shields. Water Cooled Mandrel. Serial
#25-1969. Welding Equipment NOT Included !! Very Good
Condition.
1 ea S611019P Pandjiris Model #572 72" Weld Seamer. 78"
Welding/Clamping Length Capacity. 5" Minimum Part Diameter.
32" Maximum Part Diameter ( Can be Increased with a Riser ).
Variable Speed Rack and Pinion Driven Carriage. Serial #25-1046 Good
Condition
1 ea S612002P Pandjiris Model #72E6-36 72" Weld Seamer. 78"
Welding/Clamping Length Capacity. 5" Minimum Part Diameter.
36" Maximum Part Diameter ( Can be Increased with a Riser ).
Variable Speed Rack and Pinion Driven Carriage. Water Cooled Mandrel.
Gas Purge Back up Bar. Serial #400-9160 Good Condition
1 ea S505001 Pandjiris Model 72-ES-52 72" Seamer.
78" Total Welding / Clamping Length. 6" Minimum Part
Diameter. 52" Maximum Part Diameter (Currently has an 18"
High Riser that can be Removed). Equipped with a Variable Speed
Carriage, Air Clamping Mandrel, Cable Track and 4" Powered
Vertical and Horizontal Cross Slides. Welding Equipment NOT
Included !! Serial # N/A Good Condition
1ea S504001P Pandjiris Model 96-ES-36 8 Seamer Bed.
102" Total Welding / Clamping Length. 7-1/4" Minimum Part
Diameter Capacity, 36" Maximum Dart Diameter Capacity Can be
Increased with a Riser) . Water Cooled Mandrel. Gas Purge Back-up Bar.
Serial #800-4467 (Welding Equipment NOT Included) Excellent
Condition!! Seamer Complete with Side Beam and Variable Speed
Carriage!
1 ea S311001 Pandjiris 8 ft "Powered Elevation"
Longitudinal Seamer. 102" of Welding Length which Includes
3" Run-Off Each End. 5' of Powered Elevation Bed Height from
35" to 95" by a Screw Driven Carriage. 7" Diameter
Mandrel. A Complete System that Includes a Jetline #9027 Carriage
Control, #9028 Weld Sequence Control, # 9029 Cold Wire Feeder, a
Cyclomatic AVC-3 Arc Length Control with a 6" Motorized Slide and
a 6" Manual Horizontal Slide. Pendant Control for Up/Down and
Clamp/Un-clamp Functions. Serial #25-3159 Very Good Condition
1 ea S611013 Pandjiris Model 120E9-42 10 Seam Welder. 128"
total welding/clamping length capacity. 9" minimum part diameter.
42" maximum part diameter capacity (can be increased with a
riser). Water cooled mandrel. Copper back up bar. Variable speed rack
& pinion driven carriage with control. Welding equipment NOT
included. Serial # N/A Good Condition
1 ea S611004 Pandjiris Model 120FS 10 Flat Sheet Seamer. 126"
Maximum Welding/Clamping Capacity. .020 to 3/8" Thickness
Capacity. Pneumatic Plate Lifters for Ease of Alignment and
Advancement of Plates. Rack and Pinion Driven Variable Speed Travel
Carriage. Copper Back up Bar. Manual Cross Slides. Serial #10524E00 Good
Condition
1 ea S704003 Pandjiris Model 120-1/50-FS 10 Internal / Flat
Sheet Seamer. 120" welding/clamping length. .020 to 3/8"
clamping range. For flat sheet or I.D. welding on cylinders with a
50" minimum I.D.. Linde model OM-48 variable speed travel
carriage. 16.5" mandrel height. 6" wide Pandjiris 4-bar
linkage clamp finger arrangement (provides more clamping pressure and
inward surge than standard fingers). Gas purge back-up bar. 6"
manual cross slides. Welding equipment NOT included. Serial
#25-3677 Good Condition
1 ea S207001 Gouran 12 Ft. External or Flat Sheet Longitudinal
Sub-Arc Seamer. 144" Total Welding Length. Was used for
Welding of Flat Sheet. Can be Used as an External Seamer for Cylinders
with a Minimum Dia. of 20". Currently a Maximum Dia. of 36"
but can be Increased with a Riser. Equipped with a Lincoln DC-600
Power Supply, NA-3N Lincoln Sub-Arc Control and Feed Head. Horizontal
and Vertical Adjusters. Linde Rack and Pinion Drive Carriage and
Control. Water Cooled Mandrel with Bernard Water Circulator and an
Arcowand Flux Recovery System. As Is - Good Operating Condition
SIDE BEAM
WELDERS
1 ea WS412001 Jetline Portable Heavy Duty Cast Long Length
"Stellite" Overlay System. Jetline TKK-24 Precision
Screw Drive (1-1/2" screw) Side Beam with 24" Travel. Heavy
Duty 9-1/2" Power Vertical Slide, 8" of Z axis Manual Slide.
Long Rod Feeder with adj. dia. guide. Miller Oscillator with Center
Line Steering. Overall dimensions of Portable side Beam Assy. 76"
high, 63" wide, 60" long. System includes Miller 300 amp
Synchrowave welder and Tig Torch. Excellent Condition!
1 ea SB410001 Mavrix Series 30 2-Axis Side Beam. Motorized
3' X and 3' Y Axes Arms with Automatic Controls that Regulate Travel
Direction, Speed and Distance along with Index Direction and Distance.
Moves in Any Flat, Straight-line Direction. Both X and Y Axes Have
Adjustable Travel Limits and Either Axis can be Used to Index.
Standard Weld Travel Speed of up to 45 IPM. Serial #8910883 Good
Condition
1 ea SB209001 Mavrix Series 125 3-Axis Side Beam. Motorized
5' X and 6' Y Axes Arms with Automatic Controls that Regulate Travel
Direction, Speed and Distance along with Index Direction and Distance.
Moves in Any Flat, Straight-line Direction. Both X and Y Axes Have
Adjustable Travel Limits and Either Axis can be Used to Index.
Standard Weld Travel Speed of up to 45 IPM. With Manual Hand Crank
Elevation from 48" to 94". Good Condition
1 ea SB10301 Lincoln 6' Cantilever Mounted Side Beam. Made
for Lincoln TC-3 Travel Car (Not Included). 30" Powered
Elevation. On a Manual Travel Car to Fit a Custom Made Side Beam. Good
Condition
1 ea SB507001 Linde 8 Side Beam Tig Welding System. 10
Side Beam with a Linde OM-48 Rack and Pinion Drive Variable Speed
Carriage for a Total Travel Length of 8. Portable Floor Mounting
Stantions for a Fixed Height of 59" to the Bottom of the Beam.
4" Manual Cross Slides and a Rotary Slide. Cyclomatic AVC-3 Arc
Voltage Control. Miller Weld Oscillator. Jetline CWF-10 Cold Wire
Feeder. Good Condition.
1 ea SB504001P Jetline Model TKS-96 8 "Powered
Elevation" Side Beam. 124" Side Beam with 8 of Travel
Length. Jetline SWC-3B Variable Speed Travel Carriage. Powered
Elevation from 12" to 68" to the Bottom of the Beam.
Cyclomatic 4" x 4" Mechanical Seam Tracker. Serial #R4356. Very
Good Condition
1 ea SB506001 10 ft. Heavy Duty Custom Side Beam for Sub-Arc or
Mig Welding. Welding Length of 104". Variable Speed H.D.
Rack and Pinion Carriage. Dual 32" Horizontal Manual Cross Slides
with 5" Vertical Manual Slides. Cross Slide System has a 6"
Pneumatic Lift. Good Condition
1 ea SB609007 Jetline PST-300 Twin Head Overhead Bridge Side
Beam. 8 of Variable Speed Travel on both Carriages Mounted on
the Bridge. 12 Variable Speed Travel on the Side Beam Carriage.
134" to the Bottom of the Side Beam. Welding Torches are
Currently Mounted on Dual Powered Slides that have a Total of 60"
Vertical Travel. Welding Equipment Includes 2 each Airco Pulse Arc II
550 CV Power Supplies, 2 each Airco Med-40 Wire Feeders, 2 Each Miller
Coolmate 4 Water Circulators, 2 each AWC 1,000 Power Assisted Wire
Payoff Reels, 2 each Jetline 6" x 6" Automatic Seam Trackers
and a Jetline Jetstar Programmable Control. Good Condition
1 ea SB605007 Precision 14.5 Side Beam. 12 of
Travel by a Variable Speed Rack & Pinion Driven Carriage that runs
on Precision Round Way Track. Currently Mounted on 18" High
Stantions. Lincoln electric Vertical and Horizontal Torch Adjusters.
Manual "Z" Axis slide with 11" of Movement. Lincoln
NA-5 Control and NA-5R Mig Wire Feed Head. Power Supply Not
Included. 460 Volt. Serial #N/A Good Condition
1 ea SB605008 Precision 15 Side Beam. 12.5 of
Travel by a Variable Speed Rack & Pinion Driven Carriage that runs
on Precision Round Way Track. Fixed Height of 52". Lincoln
electric Vertical and Horizontal Torch Adjusters. Lincoln NA-5 Control
and NA-5R Mig Wire Feed Head. Power Supply Not Included. 460
Volt. Serial #N/A. Good Condition
1 ea SB605006 Precision 16 Side Beam. 13
8" of Travel by a Variable Speed Rack & Pinion Driven
Carriage that runs on Precision Round Way Track. Manual Adjustable
Height from 48.25" to 54.25" in 2" Increments. All
Controls Manufactured by Computer Weld Technologies and Include a
Motorized VSA-1000 Vertical Slide and HAS-1000 Horizontal Slides each
with a MSC-1000 Micro-Step Control, WF-100 Wire Feeder with WFD-1000
Wire Feed Control, WRC-1000 Weld Remote Control, DMC-400 Carriage
Control and a WSC-1000 Weld Sequence Control. 460 Volt. Serial #N/A Good
Condition.
1 ea SB605009 Precision 17 Side Beam. 1410"
of Travel by a Variable Speed Rack & Pinion Driven Carriage that
runs on Precision Round Way Track. Fixed Height of 50. Computer Weld
Technologies VSA1000 Motorized Vertical Slide and HSA1000 Motorized
Horizontal Slide, each with a MSC-1000 Micro-Step Controller. 460
Volt. Serial #N/A Good Condition
1 ea SB302001 Pandjiris GB PBT 12 20' Side Beam Welding System.
3 ea. Model 60 Stanchions, VSC-21-12 Variable Speed Carriage, Miller
Automatic 1 Head Timers and 4-roll Feed Head, Cyclomatic Seam Tracker,
3 Axis Manual Cross Slides. Pulse Arc Control, This is a Factory
Integrated System With all Equipment Mounted and Interfaced on
Carriage Good Condition
1 ea SB502001 Jetline TK312 26 Tig Welding Side Beam. 28
Side Beam with 26 of Travel, 50" High Floor Mount Stantions
and a Jetline Model 9026 Carriage Control with a Travel IPM Meter.
Welding Equipment to Include the Following: a Cyclomatic AVC-3 Arc
Voltage Control, a Jetline Model 9029 Cold Wire Feeder with a Micro
Wire Feed Head, a Cyclomatic 80A Magnetic Arc Oscillator, 5"
Manual Horizontal Slide and a 25" Powered vertical Slide. Serial
#920516. Excellent Condition
All of the above listings of welding seamers above have pictures and can be seen by placing the part number in the search window below. Or if you wish to see the complete list of weld seamer pictures visit the seam welders photo page Welding Seamers Pictures
