welding positioners technical information and specifications

Specials on Used Welding
Equipment and Machines
Pipe welding positioners, booms carriages manipulators, tank turning rolls, vessel rotators, turntables, longitudinal seamers, seam welders, used orbital welders, circumferential lathes, 
robotic indexing tables, planishers.


L804002 Jetline CW5-192Z Dual Carriage Welding Lathe. 5,000 lb weight capacity. 56" diameter capacity. 192" length capacity. 12" diameter 3-jaw self centering chuck. 6" pneumatic tailstock. 240" side beam with 2 each model SWG-6DZ rack and pinion driven carriages. Each carriage has an 18" manual vertical slide and a 15" horizontal beam with a manual spotting car. Welding equipment includes 2 each Hobart Arcmaster 501 power supplies with HMC-410 4-roll feed heads, controls and water cooled mig guns. Serial #969791 Very Good Condition

1 ea ME912011 Park Industries 5,000 lb Posi-Turner. 5,000 lb capacity. Consists of one drum with 2 flat nylon slings that hold, rotate, level and position work pieces for safer and more efficient fabrication. 230 volt. Serial #CT-4012 Good Condition

1 ea ME913003 Western Accu-Trol Model LC-3-2 Argon Automatic Manifold System. The LC series manifolds are specifically designed to regulate and monitor vaporized gas for portable cryogenic cylinders. The control unit changes over from the exhausted "service" bank to the "secondary" bank automatically without interruption of the line service. Adjustable line regulator from 40-85 PSIG. 750 SCFH maximum flow capacity. 2 cylinder capacity. LC series units are designed for use with portable bulk vessels with 235 PSIG relief valves only!! Serial #8636 Very Good Condition 

WS909006  “1996” Cypress Sprinkler Fabrication System. This 26’ system includes the following : 1 ea Model CB-10P Cypress plasma cutting head with a Thermal Dynamics Signature 1250 cutting system mounted on a manual travel car, 1 ea Model CW-5 Cypress welding head with a Lincoln DC-600 power supply and a pendulum type weld oscillator mounted on a manual travel car, 1 ea 26’ long side beam with 4 each bolt down mounting stations.

1 ea S912008 Webb Model J-80 80" Welding Seamer. 80" clamping/welding length capacity. 6" minimum part diameter capacity. 32" maximum part diameter capacity. Rack and pinion driven variable speed carriage. Cable tray. Water cooled back up bar. 6" manual cross slides. Welding equipment NOT included. Serial #7270 Good Condition 

1 ea S912009 Webb Model J-104 104" Welding Seamer. 104" clamping/welding length capacity. 8" minimum part diameter capacity. 32" maximum part diameter capacity. Rack and pinion driven variable speed carriage. Cable tray. Water cooled back up bar. 6" manual cross slides. Welding equipment NOT included. Serial #9X106A Good Condition

1 ea C912010 Cecil Peck Circular Welder. Manual Table Lift. No Table. 1" to 6" Diameter Capacity. Variable Speed Rotation. Pedestal Control Console for all Functions. No Welding Equipment. Serial #N/A Good Condition

PS810027 Stellite Coatings Starweld Plasma Arc Transfer System. System includes a Stellite Starweld II power supply console, gas control panel, X,Y and Z motorized slide assembly, torch oscillator, torch angle assembly, Variable speed headstock with pneumatic tailstock assembly, center support roller assembly, control pendant with touch screen, refrigerated torch water cooler, model KK-2 powder feeder, model 600 torch and complete cable and hose package. Sold new in 2000 for over Very little use.  A Must See Excellent Condition



Welding Manipulators

ARO 99 12X12 "NEW" Ransome Model 99 12’ x 12’ Manipulator. 12’ Constant Speed Power Lift at 40 IPM from 28-1/2" to 172-1/2" to the center of the Boom. 12’ Variable Speed Power Reach of 1.5 to 150 IPM from 24" to 168" from the Center of the Mast. 500 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control. 

ARO 99BL "NEW" Ransome Optional Free Standing Base. For Model 99 12’ x 10’ or 12’ x 12’ Manipulator

1 ea ARO 1212 14X14 "NEW" Ransome Model 1212 14’ x 14’ Manipulator. 14’ Constant Speed Power Lift at 36 IPM from 28-1/2" to 148-1/2" to the center of the Boom. 14’ Variable Speed Power Reach of 1.8 to 180 IPM from 30-1/2" to 198-1/2" from the Center of the Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control.

1 ea ARO 1212BL "NEW" Ransome Optional Free Standing Base. For Model 1212 14’ x 12’ or 14’ x 14’ Manipulator

1 ea WPI TCM "NEW" Universal Manipulator Variable Speed Travel Car. Variable Speed Travel from 3" to 135" IPM that runs on 56-1/2" A.S.C.E. 60# Machined Rail Track. Pendant Control. 230/460 Volt. "NEW"

Any WPI TCT "New" Universal Track for Manipulator Travel Car. 10’ x 56-1/2" A.S.C.E. 60# Machined Rail Track. "NEW"


ARO CPRR / CIRR “NEW” Ransome 60 Ton “C” Series Turning Roll Set. Set includes 1 each CPRR drive unit and 1 each CIRR idler unit for a capacity of 120,000 lb (add an additional idler for a total capacity of 180,000 lb). Variable Speed drive from 1.45 to 58 ipm. 20.5” diameter x 14” wide rubber wheels. For diameters from 7” minimum to 20’ maximum. 20’ Pendant control for all functions. 460 volt. Shipping weight 5,600 lbs/set. NEW – Ready to Ship!

Preston-Eastin "NEW" TDRA/TIRA-120-22D, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20" dia. x 8" wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8" to 22 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control. 460 volt input. "New" in our Stock!

Complete List of Welding Lathes


Satellite positioner manipulator for handling expensive payloads with precision control. This is a one of a kind positioner designed by a NASA engineer for a project just completed. We have a complete video of the operation of the positioner for interested companies.
Visit our web site Weld Plus Inc. Aerospace Positioners



Call 800-288-9414
Contact
A Member of the Weld Plus Sales Team

If you have any questions, Please email Us
weldplus@weldplus.com



To Search our database of used products pictures, please enter a part number
or product name. Like positioners, manipulators, turning rolls, seamers, etc.



Product Pictures CWT arc welding monitors Web Pages
Home | About Us | Automation | Circumferential Welders | Contact Us Cutting Machines | EMail Us | Our Inventory | Line Card
Metco
Manipulators | Miscellaneous Equipment | Head-Tail Stocks
Positioners | Planishers | Product List | Rental Equipment
Search Site
| Seamers | Turning Rolls | Turntables | Used Welders
Vendor Links
| Sale Items | New Arrivals |
Surplus Mig Gun Parts



Weld Plus Inc.   4790 River Road.   Cincinnati, Ohio 45233
1.800.288.9414 Toll Free    1.513.941.4411 Phone    1.513.467.3585 Fax



sales@weldplus.com

Send mail to webmaster@weldplus.com with questions or comments about this website.
Weld Plus Inc. Welding News
Last modified:
December 28th, 2010

Copyright © 1996-2012 Weld Plus Inc.