1 ea T309002 Kistler Model U-150 - U-150H Pipe Rotator with Clamping Roller System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Good Condition.
Any WPI TRD2000/WRI2000 "NEW" Weld Plus #2000 Turning Rolls. Drive Roll & Idler each have a capacity of 2000 lbs. For diameters from ½" to 40". 10" dia. wheels, High Frequency Protection, Variable Speed Control. With Foot Switch. 115 volt "NEW".
1 ea P410004 Ferguson 16/2-F475-270 Pipe Rotator with Clamping Roller System. 3,000 lb Load Capacity. 3" to 20" Diameter Capacity. Variable Speed Pipe Rotation by a Set of 12" Diameter Steel Wheel Turning Rolls with a Hold Down Devise. Turning Rolls are Mounted on a Constant Speed Side Arm Table that has 360 Degree Power Rotation. A Unique System for Welding Off Set Pipe and Pipe Elbows in Any Position. Serial #61418 Good Condition.
1 ea T405001 Radian 3,000 lb Used Turning Rolls. Drive Roll with Idler. 3,000 lb Total Weight Capacity. 16" Diameter x 4" Wide Rubber Tires. Overload Discs. Constant Speed Friction Drive Rotation. 4" Minimum to 36" Maximum Diameter Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint. Good Condition or Converted to Variable Speed with Pendant.
1 ea T405002 Radian 3,000 lb Turning Rolls. Same As Above. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant.
1 ea T409005 Pandjiris Piper 3 Pipe Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Forward/Stop/Reverse Foot Pedal. Serial #800-8490-26 Good Condition.
1 ea T408004 Pandjiris Piper 3 Pipe Power Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Forward/Stop/Reverse Foot Pedal. Serial #800-5099-2 Good Condition.
1 ea T976004 Worthington Type A, 4000 lbs Driver Only. 15" dia. X 3" Wide Rubber Faced Rolls, Variable Speed, 12,000 lbs Turning Capacity. Good Condition.
1 ea T405003 Radian 5,000 lb Turning Rolls. Drive Roll with Idler. 5,000 lb Total Weght Capacity. 16" Diameter x 1" Wide Steel Wheels. Overload Discs. Constant Speed Chain Drive Rotation. 4" Minimum to 36" Maximum Diameter Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition.
$2,950. Converted to Variable Speed with Pendant.
1 ea T405004 Radian 5,000 lb Powered Pipe Turning Rolls. Same as Above. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant.
1 ea T306003 Koike-Aronson WPR51-36 Pipe Turning Rolls. 5,000 lb Weight Capacity. 3" to 48" Diameter Capacity. Variable Speed from 2 to 50 IPM by a New SCR DC Drive and New 3/4 H.P. DC Motor. 36" Frame Length. Pendant Control. Serial #67166.Good Condition.
1 ea T408003 Aronson WPR4WD-52 Pipe Turning Rolls. 5,000 lb Load Capacity. 3" to 42" Diameter Capacity. 52" Frame Length with 2 each Additional Companion Idlers. Variable Speed From 2.0 to 50.0 IPM. Pendant Control. 115 Volt. Serial #7437 Good Condition.
1 ea T309003 Koike Aronson Model WPR-52-48 Unit Frame Turning Roll. 5,000 lb Weight Capacity. 3" to 42" Diameter Capacity. 48" Frame Length. Variable Speed From 2.0 to 50 IPM. On / Off Foot Pedal. 115 Volt. Serial #73296 Good Condition.
1 ea T309004 Koike Aronson Model WPR-52-48 Unit Frame Turning Roll. 5,000 lb Weight Capacity. 3" to 42" Diameter Capacity. 48" Frame Length. Variable Speed From 2.0 to 50 IPM. On / Off Foot Pedal. 115 Volt. Serial #74306 Good Condition.
1 ea T409003 Ransome/Worthington AIRR Idler Roll. 5,000 lb Weight Capacity. 5" to 12’ Diameter Capacity. 2-1/2" Wide x 16" Diameter Rubber Wheels Good Condition.
1 ea T409004 Ransome/Worthington AIRR Idler Roll. 5,000 lb Weight Capacity. 5" to 12’ Diameter Capacity. 2-1/2" Wide x 16" Diameter Rubber Wheels Good Condition.
1 set T10805 Teledyne-Readco TRR-50, 5000 lb Steel Wheel Tank Turning Rolls. Variable Speed ½ HP, 115 volt, Pendant Control of 2.5 to 75 IPM. 9" diameter x 4" wide Steel Wheels. For diameters from 3" to 66". Now set in unitized frame. 1980 Ser. #S-84563. Good Condition.
2 sets WPI T6/I6 "NEW" Weld Plus #6000 Power Turning Rolls. 6000 lb Capacity Set Includes: 1 Drive Roll & 1 Idler Roll. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 48 IPM, Pendant Speed Control, For Diameters From 3" to 72" via 3 Ctr. 115 volt. Ship Wt. 490 lbs/set. "NEW"
2 ea T204001 Aronson T1I 6,000 Idler Roll. 6,000 lb Capacity. 24" Diameter x 3" wide Rubber Wheels. 4' Minimum Capacity, 10' Maximum Diameter Capacity. Idler Only. Serial #6049 Good Condition.
1 ea T303003 Unique UTP-5T / UTI-5T 5,000 lb Turning Roll. 5,000 lb Turning Capacity, 2,500 lb Support Capacity per Drive, 3" Minimum Part Diameter, 96" Maximum Part Diameter, Variable Speed by a Reeves Drive, 11-1/2" Diameter x 3-1/2" Rubber Wheels, On/ Off Foot Pedal, Serial #124B Good Condition or with 3 each Additional Idlers Available option.
3 sets T1011009 Manual Approx. 8000 lbs Turning Rolls. These rolls are custom built with one wheel on the Driver set up for approx. 2 RPM Constant Speed. That is approx. 70 IPM surface speed. They can be used for manual rotation of your tank by removing the drive chain, or you can change the drive mechanism to a variable speed drive. The 11" dia. X 6" wide Rubber wheels are just in Fair condition. For use on Diameters of approx. 2 ft to 12 ft. We offer these rolls in the "AS IS" Condition ONLY! (No Exceptions) Fair Condition.
1 ea T405005 Radian 10,000 lb Reconditioned Turning Rolls. Drive Roll and Idler. 10,000 lb Total Weight Capacity. 16" Diameter x 3.5" Wide Rubber Wheels. Constant Speed Rotation. 4" Minimum to 144" Maximum Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant.
1 ea T405006 Radian 10,000 lb Turning Rolls. Same as Above. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant.
1 ea T405007 Radian 10,000 lb Turning Rolls. Same as Above. Electrical Re-Conditioned - No Clean Up or Paint Good Condition $ 3,950. Converted to Variable Speed with Pendant.
1 ea T209007 Aronson WRD-5/WRI-5, 5 Ton Tank Turning Rolls. 12" Diameter x 4" wide Rubber Wheels. Variable Speed from 2.0 to 50 IPM. Pendant Control. For Diameters from 6" to 13'. Serial #6433 Good Condition.
1 ea T209003 Aronson Model WPS4WD101-18 4-Wheel Drive Unit Frame Pipe Turning Roll. "1995" 10,000 lb Capacity. 18" Frame Length. 24" to 54" Diameter Capacity. 15" Diameter x 2.5" Wide Steel Wheels. Variable Speed from 2.0 to 50 IPM. Pendant Control. Used for Overlaying of Short Steel Mill Rolls. Serial #9580 Good Condition.
1 set WEB T-18/I-18 "NEW" 12,000 lb Powered Turn Rolls. Set Includes 1 T-18 Driver and 1 I-18 Idler (add extra Idler for 18,000 lb Capacity). 12" Diameter Rubber Wheels, 2 Wheels per Axle for 7" Total Wheel Face. For Diameters from 12" to 12’. Variable Speed from 7 to 70 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship.
1 set T9911003 Teledyne Readco TR 12/6, 6 Ton Pipe Rolls. Made Special by Teledyne for Large Heat Exchanger Plant. Power Rolls On Stands & Idler Rolls on Manual Track Mounted Cars for Various Length Sections. 12" X 4" Rubber Wheels w/3 Settings for 6" to 36" Dia. Pipe. Variable Speed ¾ HP DC Drive. Pendant Control. Size: 28" Floor to Top of Wheels, Driver 56" Wide, 27" Deep, Idler Car 49" Wide, 35" Long. Car runs on Vee Wheels, w/Track. Very Heavy Duty Construction. Ser.# 108028 1991 (4 Sets, See Next Items) Very Good Condition.
1 ea T304001 Teledyne Readco 6.7 Ton Turning Roll Set. Model TPR-20/6.7 Drive Roll with a Turning Capacity of 20,000 lb and a Weight Capacity of 6,667 lb. Set includes a Model TIR-6.7 Idler Roll with a weight Capacity for a Total Capacity of 13,334 lbs for the Set. 6" to 144" Diameter Capacity. Variable Speed. Pendant Control. Serial # N/A Good Condition.
1 set WEB T-30/I-30 "NEW" Webb 20,000 lb Power Turn Rolls. Set Includes 1 T-30 Driver and 1 I-30 Idler (add extra Idler for 30,000 lb Capacity). 12" Diameter Rubber Wheels, 4 Wheels per Axle for 14" Total Wheel Face. For Diameters from 12" to 12'. Variable Speed from 7.5 to 60 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship!
1 ea T301003 Aronson WSD-10-42/WSI-10-42 10 Ton Steel Wheel Turning Rolls. 12" dia. X 4" wide Steel Wheels. Var. Speed ¾ HP SCR Drive from 2 to 50 IPM. Foot Switch, For diameters From 6" to 48". Serial #7445 Good Condition.
1 set T10702 Aronson WSD-10/WSI-10, 10 Ton Steel Wheel Vessel Turning Rolls. 12" dia. X 4" wide Steel Wheels. Var. Speed ¾ HP SCR Drive from 2 to 50 IPM. Foot Switch, For diameters From 6" to 13 ft. Good Condition.
1ea T209006 Aronson WRD-10/WRI-10, 10 Ton Welding Turning Rolls. 12" dia. X 4" wide Rubber Wheels with Over Load Discs. Variable Speed from 2 to 50 IPM. Pendant Control. For diameters From 6" to 13 ft. Serial #63132 Good Condition.
1 set T212002 Aronson WRD-10/WRI-10, 10 Ton Turning Rolls. 12" Dia. x 4" wide Rubber Wheels with Over Load Discs. Var. Speed ¾ HP Reeves Drive from 2 to 50 IPM. Pendant Control. For diameters From 6" to 13 ft. 460 Volt. Serial #72183 Good Condition.
1 ea T212004 Aronson WRD-10/WRI-10, 10 Ton Turning Rolls. 12" Dia. x 4" wide Rubber Wheels with Over Load Discs. Var. Speed ¾ HP Reeves Drive from 2 to 50 IPM. Pendant Control. For diameters From 6" to 13 ft. 460 Volt. Serial #75378 Good Condition.
1 set T10801 Joe Fuller Model JFRD-10, 10 Ton Used Turning Rolls. Capacity 20,000 lbs. ¾ H.P. Variable Speed Electronic Drive with Pendant Control. 12" x 4-1/2" Rubber Tires with Overload Disc. For Diameters from 6" to 13 ft. Very Good Condition.
1 ea T409001 Pandjiris MM-15/5-T Missouri Mule Turning Rolls. 20,000 lb Load Cap., 4" to 12’ Diameter Capacity. Variable Speed from 2.1 to 63.5 IPM. "Missouri Mule" Turning Rolls Provide a Constant Centerline of Operation While Requiring Less Floor Space than Standard Turning Rolls Their Size. Includes a Pendant Control. Serial #N/A Good Condition.
1 ea T409002 Pandjiris MM-15/5-T Missouri Mule Tanker Turning Rolls. 20,000 lb Load Cap., 4" to 12’ Diameter Capacity. Variable Speed from 2.1 to 63.5 IPM. "Missouri Mule" Turning Rolls Provide a Constant Centerline of Operation While Requiring Less Floor Space than Standard Turning Rolls Their Size. Includes a Pendant Control. Serial #N/A Good Condition.
1 set T102002 Pandjiris PR-30, 10 Ton Rotating Turning Rolls, Turning Cap. Is 15 Tons. This set includes 1 PR-30 Driver, 1 IR-10 Idler. which has a cap. of 10 tons Cap. increases to 15 tons with addition of 2 cd idler. Pendant Control with Elect. SCR Var. Speed . 16" wheel dia. X 4" rubber face. For dia. from 6" to 15 ft. Ser. #81-2119-1 Very Good Condition.
1 set T102003 Pandjiris PR-30, 10 Ton Tanker Turning Rolls, Turning Cap. Is 15 Tons. This set includes PR-30 Driver, 1 IR-10 Idler. which has a cap. of 10 tons Cap. increases to 15 tons with addition of 2 cd idler. Reeves Variable Speed Control, Pendant for Stop/Start, For/Rev. 16" wheel dia. X 4" rubber face. For dia. from 6" to 15 ft. Ser. #800-4515-6 Very Good Condition. Ready Now.
1 set T10905 Unique/Readco 16 Ton Welding Turning Rolls. Speed Controlled by Speed Trol Variable Speed Drive with 1 H.P. AC Motor. Input Power 230/460 3-Phase. Pendant Control for Forward-Stop-Reverse. Double 12" dia x 4" wide Rubber Wheels on each shaft. Work Diameter Range from 6" to 144". Good Condition Ready Now. Tank Rotator.
1 ea T207002 Unique/Readco 16 Ton Power Pipe Turn Rolls. Speed Controlled by Speed Trol Variable Speed Drive with 1 H.P. AC Motor. Input Power 230/460 3-Phase. Pendant Control for Forward-Stop-Reverse. Double 12" dia x 4" wide Rubber Wheels on each shaft. Work Diameter Range from 6" to 144". Good Condition Ready Now.
1 set TSP10802P Pandjiris MM-15T-SPL Rotation System for Ultrasonic Testing. This is a U.T. Rotation System for Digitally Indicated, Variable Speed, Turning of Cylindrical Parts under fluids flow. The System uses the Missouri Mule 15 Ton Turning Roll Configuration, Specially Manufactured for this type of Testing. The Drive Wheels are 16" dia. Grooved, Hardened Steel which are can be pivoted up and down for various workpiece diameters. The Idler Wheels are 6" Grooved, Hardened Steel , and have 13" of Motorized Powered Adjustable Height. There are "Vertical Thrust Rolls" on both driver and idler to prevent unwanted "walking". The Driver and Idler separation is adjustable for lengths from 24" to 100" by a long hand wheel screw. The whole system is in a fluid collection pan. Ser. #673-862 Very Good Condition!
1 set TSP10801P Pandjiris MM-30T-SPL Rotation System for Ultrasonic Testing. This is a "1994" U.T. Rotation System for Digitally Indicated, Variable Speed, Turning of Cylindrical Parts under fluids flow. The System uses the Missouri Mule 30 Ton Turning Roll Configuration, Specially Manufactured for this type of Testing. The Drive Wheels are 20" dia. Grooved, Hardened Steel which are can be pivoted up and down for various workpiece diameters. The Idler Wheels are 6" Grooved, Hardened Steel , and have 14" of Motorized Powered Adjustable Height. There are "Vertical Thrust Rolls" on both driver and idler to prevent unwanted "walking". The Driver and Idler separation is adjustable for lengths from 30" to 120" by a long hand wheel screw. The whole system is in a fluid collection pan fitted with removable platform slat sections. Ser. #SO. 60-4604 This is a "Ready to Ship" Rotation System in Excellent Condition!
1 set WEB R-500/I-500 "NEW" Webb 34,000 lb Tank Turning Rolls. Set Includes 1 R-500 Drive and 1 I-500 Idler (add extra Idler for 50,000 lb Capacity). 18" Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7". For Diameters from 6" to 15’. Variable Speed from 7 to 63 IPM. With Remote Pendant Control. 230/460 Volt. Brand New – Ready to Ship!
1 set ARO WRD-20/WRI-20 "NEW" Koike-Aronson 20 Ton Pipe Weld Turning Rolls. Capacity: 1 Drive, 1 Idler 20 Tons. Add 1ea additional Idler (not included) Cap. 30 Tons. Three (3) 12" dia. X 4" Rubber Wheels per axle with Overload Disc. Variable Speed of 2 to 50 IPM surface speed.. For work diameters from 6" to 13 ft. Remote Pendant Control. Input Power 460 volt 1 phase. NEW!!! - IN STOCK - Drive and Idler set Additional Idler available.
1 set WEB M-500/I-500 "NEW" Webb 40,000 lb Powered Welding Turning Rolls. Set Includes 1 M-500 Drive and 1 I-500 Idler (add extra Idler for 60,000 lb Capacity). 22" Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7". For Diameters from 24" to 14’. Variable Speed from 6.4 to 64 IPM. With Remote Pendant Control. 230/460 Volt. Brand New – Ready to Ship.
1 ea T307002 Koike-Aronson WRD-20/WRI-20, 20 Ton Tank Turning Rolls. Capacity: 1 Drive, 1 Idler 20 Tons. Add 1ea additional Idler (not included) Cap. 30 Tons. Three (3) 12" dia. X 4" Rubber Wheels per axle with Overload Disc. Variable Speed of 2 to 50 IPM surface speed.. For work diameters from 6" to 13 ft. Remote Pendant Control. Input Power 460 volt 1 phase.. Ser. #80334 Good Condition.
1 ea T307003 Koike-Aronson WRD-20/WRI-20, 20 Ton Weld Turning Rolls. Capacity: 1 Drive, 1 Idler 20 Tons. Add 1ea additional Idler (not included) Cap. 30 Tons. Three (3) 12" dia. X 4" Rubber Wheels per axle with Overload Disc. Variable Speed of 2 to 50 IPM surface speed.. For work diameters from 6" to 13 ft. Remote Pendant Control. Input Power 460 volt 1 phase.. Ser. #91486 Good Condition.
5 ea T408005-009 Blazer 40,000 lb Capacity Idler Roll. 8" – 14’ Diameter Capacity, 9" Wide x 20" Diameter Rubber Wheels. 5 Units Available - Good Condition.
1 set T004001P Ransome CPRS/CIRS 30 Ton Steel Wheel Vessel Turning Rolls. 1 Driver, 1 Idler, 3 HP Variable Speed Drive, 25" dia. X 3-1/4" Steel Wheels. For Diameters from 7" to 20’. Good Condition.
1 ea T209004 Ransome/Worthington "B" Series Weld Turning Rolls. 30 Ton Capacity (Add an Additional Idler for a total Turning Capacity of 45 Tons). Set Includes 1 each Drive and 1 each Idler. 7" to 20' Diameter Capacity. Variable Speed and from 4.8 to 43 IPM. 20.5" Diameter x 7" Wide Rubber Wheels. Pendant Control. Serial #42371088 Good Condition $11,500. Additional Idler Unit.
1 ea T307001 Koike-Aronson WRD-30, 30 Ton Piping Rollers. Drive Unit Only. 15,000 lb Support Capacity, 45,000 lb Turning Capacity. 6" Wide x 20" Diameter Rubber Wheels. Variable Speed from 1.4 to 40 I.P.M.. 8" to 18' Diameter Capacity. Pendant Control. Serial #93111 Very Good Condition or with New Idlers Available.
1 ea T305001 Koike-Aronson WRD-30/WRI-30, 30 Ton Power Turning Rolls. Capacity: 1 Drive, 1 Idler 30 Tons. Add 1ea additional Idler (not included) for a Capacity of 45 Tons. 6" Wide x 20" Diameter Rubber Wheels. Variable Speed from 1.4 to 40 I.P.M.. 8" to 18' Diameter Capacity. Pendant Control. Serial #89100 Good Condition.
1 ea T301001 Webb R-1000, 66,000 lb Turning Rolls. Set Includes: 1-R-1000 Driver, 1-R-1000 Idler (add extra Idler for 100,000 lb capacity). Rubber Wheel Dia. 18", 2 Wheels per axle for 14" Total Wheel Face. For Diameters from 6" to 15'. Variable Speed Range from 5 to 52 IPM. Pendant Control. Serial # N/A Good Condition Tank Welding Rotators.
1 ea T306004 Aronson WSD25-10 42 Ton Constant Center Line Powered Turning Roll. Set Includes 1 each Drive Roll with a Load Capacity of 25,000 lbs and a Turning Capacity of 84,000 lbs. Along With 3 each Idler Rolls each with a Load Capacity of 25,000 lbs., Variable Speed Rotation from 1.6 to 64 RPM. 8" to 18' Diameter Capacity. 5" Wide x 20" Diameter Steel Wheels. Both Wheels Adjust In or Out to Allow Vessels to Remain on Constant Center for All Diameters. New Motor and Control Installed on Drive Unit. Serial #7010 Good Condition.
1 set T102214 "NEW" R-1500, 100,000 lb Power Turning Rolls. Set Includes: 1 ea R-1500 Driver, 1 ea R- 1500 Idler (add extra idler for 150,000 lb capacity). Rubber Wheel diameter 18" with 3 Wheels per axle for a Total Wheel face of 21". For Diameters from 6" to 15'. Variable Speed with Remote Pendant Control. 1 year warranty. Brand New – Ready to Ship!
1 set T008001P Aronson WSD-80 & WSI-80, 80 Ton Steel Wheel Turning Rolls. Variable Speed 1.2 to 48 IPM, Pendant Control, 20" X 5" Solid Steel Wheels. Ser.# 7515/7521 Good Condition.
1 set T409006 Teledyne-Readco 120T "Turbine Rotor" Turning Rolls. 240,000 lb Capacity. Variable Speed Rotation from 1 to 30 IPM. 24" Diameter x 12" Wide Rubber Wheels. Diameter Capacity from 10" to 40". Rolls are Mounted on a 57" Riser Base for a Total Height of 91" to the Top of the Rolls. Serial #106528/106531 Good Condition.
1 set T008002P Aronson 200 Ton "Twin Driver" Turning Rolls. Model WSD-200-S2G. Ser.# 667 Twin Driver Turning Rolls use one Driven Wheel on each Roll Stand. Also one of these driven wheels has Two Final Gear Drive Worm Gears on each side of the axle, thus the two pinions work in opposite directions to Eliminate Backlash. This Design was developed by Aronson for Babcock & Wilcox so the turning rolls could be used under Vertical Boring Mills. Good Condition.
1 ea T210001P Aronson WSD-300/WSI-300 300 Ton Tank Turning Rolls. 10 HP Variable Speed Drive from .8 to 48 IPM. 28" Diameter x 5" wide Steel Wheels per axle. Diameter Capacity from 2" to 20' Diameter. Serial #7827 Good Condition.
1 ea T303001 Koike-Aronson WSD-300/WSI-300 300 Ton Rotating Turning Rolls. 10 HP Var. Speed SCR DC Drive from .8 to 48 IPM. 28" Diameter x 5" wide Steel Wheels . Diameter Capacity from 2' to 12' Diameter. Pendant Control. Serial #N/A Good Condition
.
