Any
Be-co Model F-400 Standard Universal Power Unit. Intended
for both automatic and hand work, the F-400 is equipped with a ½-horsepower
AC/DC motor, a 400:1 gear ratio, and dual-speed drive allowing
either 3 to 20 or 5 to 30 inch-per-minute rotational speed. Our
Standard BE-CO units will accommodate pipe sizes from 2" to
10 diameters with quick-connecting expansion chains.
"New"
Any Be-co NEW Model F-600 Heavy Duty Universal Power
Unit. A heavy duty power unit with greater turning force for
larger tank rotation This unit is identical to the Model F-400
standard power unit, but with a 600:1 gear ratio providing a choice
of 2 to 13 1/3 or 3 1/3 to 20 ipm rotational speed."New
Any PRO TR1500 "New" Profax 1,500 lb Turning Rolls. 1,500
lb Turning Capacity (750 lb Max Set Down Weight for each the Drive
and Idler). 1-1/2" to 16" Diameter Capacity. Variable
Speed from 0.0 to 140 IPM. 10" Diameter x 2" Wide Rubber
Wheels. High Frequency Protected. 115 Volt.
Any WPI TRD2000/WRI2000 "NEW" Weld Plus #2000
Turning Rolls. Drive Roll & Idler each have a capacity of
2000 lbs. For diameters from ½" to 40". 10" dia.
wheels, High Frequency Protection, Variable Speed Control. With Foot
Switch. 115 volt
Any GEN TR0100 "NEW" Gentec Model TR-0100 2,200 lb
Turning Roll Set. 2,200 lb total weight capacity. 1" to
31" diameter capacity. Variable speed from 3.5 to 63 IPM.
2" wide x 8" diameter polyurethane wheels. High frequency
protected. 115 volt
Any PAN PIPER 3 "NEW" Pandjiris Piper 3
Turning Rolls. 4,000 lb Load Capacity, Add an Additional Idler
for a Total Capacity of 6,000 lb. 3-1/2" to 40" Diameter
Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler.
2-1/2" Wide X 12" Diameter Rubber Wheels. Drive and 1 ea.
Idler. Pendant Control.
PRE RPJS 50 Preston-Eastin Model RPJS-50 5,000 lb Pipe
Support Stand. 5,000 lb weight capacity. 2 to 40
diameter capacity. Manual adjustable height from 27.5 to 37.5
to the top of the rolls
Any WPI T6/I6 "NEW" Weld Plus #6000 Turning Rolls. 6000
lb Capacity Set Includes: 1 Drive Roll & 1 Idler Roll. Each Axle
Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM,
Pendant Speed Control, For Diameters From 3" to 72" via 3
Ctr. 115 volt. Ship Wt. 490 lbs/set.
Any WPI T9D 8 "NEW" Weld Plus #6000 Turning Rolls. 6000
lb Capacity (Add an additional idler for a total capacity of 9,000
lb.). Set Includes: 1 Drive Roll & 1 Idler Roll. Dual Driven
Power Unit. Each Axle Has Double 10" X 2" Rubber Rolls.
Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From
3" to 96" via 4 Ctr. 115 volt. Ship Wt. 580 lbs/set.
WEB T-18/I-18 NEW 12,000 lb Turning Rolls. Set
Includes 1 T-18 Driver and 1 I-18 Idler (add extra Idler for 18,000
lb Capacity). 12 Diameter Rubber Wheels, 2 Wheels per Axle for
7 Total Wheel Face great for thin walled tanks !!.
For Diameters from 12 to 12. Variable Speed from 0 to 45 IPM.
With Remote Pendant Control. 115 Volt. Ship Wt. 1,420 lbs/set
1 ea PAN TANKER 150/75 "NEW" Pandjiris 15,000 lb
Tanker Turning Roll Set. 15,000 lb weight capacity. 3.5" to
12 diameter capacity. Variable speed from 2.9 to 72 IPM. 25
pendant control. 115 volt. No wheel adjustments to be made for
the full range of diameters and Tankers maintain a constant center
line !
WEB T-24/I-24 NEW 16,000 lb Turning Rolls. Set
Includes 1 T-24 Driver and 1 I-24 Idler (add extra Idler for 24,000
lb Capacity). 12 Diameter Rubber Wheels, 3 Wheels per Axle for
10.5 Total Wheel Face F great for thin walled
tanks !!. For Diameters from 12 to 16. Variable
Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Ship
Wt.1,400 lbs/set.
WEB T-30/I-30 "NEW" Webb 20,000 lb Turning
Rolls. Set Includes 1 T-30 Driver and 1 I-30 Idler (add
extra Idler for 30,000 lb Capacity). 12" Diameter Rubber
Wheels, 4 Wheels per Axle for 14" Total Wheel Face great
for thin walled tanks !!. For Diameters from 12"
to 16'. Variable Speed from 0 to 45 IPM. With Remote Pendant
Control. 115 Volt. Ship Wt. 1,750 lbs/set.
IRC 15 5D/5I NEW Irco Automation 20,000 lb Turning
Rolls. Set includes 1 15-5 driver and 1 15-5 idler (add
an additional idler for 30,000 lb total capacity). 12 diameter
x 3 wide durable chemical resistant neoprene wheels, 2 wheels
per axle for a 6 total wheel face. For diameters from 12 to
12. Pull pin for easy adjustment of vessel size no
more losing bolts or looking for a wrench to make a size change !!
Variable speed from 2 to 55 IPM. With remote pendant
control. 460 Volt. Shipping Weight 1,550 lbs/set
1 set WEB R-500/I-500 "NEW" Webb 40,000 lb Turning
Rolls. Set Includes 1 R-500 Drive and 1 I-500 Idler (add extra
Idler for 60,000 lb Capacity). 18" Diameter Rubber Wheels, 1
Wheel per Axle with a Wheel Face of 7". For Diameters from
10" to 15. Variable Speed from 7 to 58 IPM. With Remote
Pendant Control. 230/460 Volt.
IRC 30 10D/10I NEW Irco Automation 40,000 lb Turning
Rolls. Set includes 1 30-10 driver and 1 30-10 idler (add
an additional idler for 60,000 lb total capacity). 12 diameter
4 wide durable chemical resistant neoprene wheels, 2
wheels per axle for an 8 total wheel face. For diameters from
12 to 12. Pull pin for easy adjustment of vessel
size no more losing bolts or looking for a wrench to make a
size change !! Variable speed from 2 to 55 IPM. With
remote pendant control. 460 Volt. Shipping Weight 1,850 lbs/set.
ARO WRD-20/WRI-20 "NEW"
Koike-Aronson 20 Ton Turning Rolls. Capacity: 1 Drive, 1 Idler
20 Tons. Add 1ea additional Idler (not included) Cap. 30 Tons. Three
(3) 12" dia. X 4" Rubber Wheels per axle with Overload
Disc. Variable Speed of 2 to 50 IPM surface speed.. For work
diameters from 6" to 13 ft. Remote Pendant Control. Input Power
460 volt 1 phase
1 set WEB M-500/I-500 "NEW" Webb 40,000 lb Turning
Rolls. Set Includes 1 M-500 Drive and 1 I-500 Idler (add extra
Idler for 60,000 lb Capacity). 22" Diameter Rubber Wheels, 1
Wheel per Axle with a Wheel Face of 7". For Diameters from
24" to 14. Variable Speed from 7 to 61 IPM. With Remote
Pendant Control. 230/460 Volt.
1 set PAN MM30/15 "NEW" Pandjiris Missouri Mule
30/15 Turning Rolls. Drive and Idler. 60,000 lb Weight Capacity.
12" to 16 Diameter Capacity. Variable Speed from 5.3 to 53
IPM. 20" Diameter x 10" Wide Rubber Wheels. Pendant
Control. 460 Volt
IRC 45 15D/15I NEW Irco Automation 60,000 lb
Turning Rolls. Set includes 1 45-15 driver and 1 45-15
idler (add an additional idler for 90,000 lb total capacity). 20
diameter x 4.5 wide durable chemical resistant polypropylene
wheels. For diameters from 12 to 20. Pull pin for easy
adjustment of vessel size no more losing bolts or looking for a
wrench to make a size change !! Variable speed from 1.5 to
45 IPM. With remote pendant control. 460 Volt. Shipping Weight 3,550
lbs/set.
1 set WEB R-1000/I-1000 "NEW" 80,000 lb 40 ton
Turning Rolls. Set Includes: 1 ea R-1000 Driver, 1 ea R-1000
Idler (add extra idler for 120,000 lb capacity). Rubber Wheel
diameter 18" with 2 Wheels per axle for a Total Wheel face of
14". For Diameters from 10" to 20'. Variable Speed fro 7
to 58 IPM. With Remote Pendant Control. 1 year warranty. We stock
460 volt, 230 on request.
1 set T102214 "NEW" Webb R-1500, 120,000 lb 60 ton
Turning Rolls. Set Includes: 1 ea R-1500 Driver, 1 ea R- 1500
Idler (add extra idler for 180,000 lb capacity). Rubber Wheel
diameter 18" with 3 Wheels per axle for a Total Wheel face of
21". For Diameters from 10" to 22'. Variable Speed from 7
to 56 IPM. With Remote Pendant Control. 1 year warranty. We stock
460 volt, 230 on request.
ARO CPRR / CIRR NEW Ransome 60 Ton C Series
Turning Roll Set. Set includes 1 each CPRR drive unit and 1
each CIRR idler unit for a capacity of 60,000 lb (add an additional
idler for a total capacity of 90 ton.). Variable Speed drive from
1.45 to 58 ipm. 20.5 diameter x 14 wide rubber wheels. For
diameters from 7 minimum to 20 maximum. 20 Pendant control
for all functions. 460 volt. Shipping weight 5,600 lbs/set.
1 set RAN Koike Ransome "NEW" 100 Ton "MICARTA"
Turbine Rotor Turning Rolls. Model 100 PRM Power Roll, Model
50IRM Idler Roll. Micarta Rolls are 22" diameter X 8"
wide Micarta Surface. Roller Center Line Distance 23", For
Shaft diameters from 8" to 32", 3 HP AC Inverter Drive,
Variable Surface Speed of Roller from 1.5 to 60 IPM. Pendant Control
w/40 of Control Cable with Forward, Stop, Reverse, 10 Turn Pot.
Speed Control and Rapid Traverse. Input Power Required 460 volts, 60
Hz. 3 phase.
1 set PRE Preston-Eastin "NEW" TDRA/TIRA-120,
240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120,
120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total
Capacity of 240,000 lbs or 120 tons. This set will Turn and
Support 360,000 lbs or 180 tons by adding optional extra TIRA-120
Idler. Three (3) Tires 20" dia. x 8" wide and Four (4)
Overload Disc per Axle. For work rotating diameters from 8" to
16 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote
Pendant Control 460 volt input.
1 set PRE Preston-Eastin "NEW" TDRA/TIRA-120-22D,
240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120,
120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total
Capacity of 240,000 lbs or 120 tons. This set will Turn and
Support 360,000 lbs or 180 tons by adding optional extra TIRA-120
Idler. Three (3) Tires 20" dia. x 8" wide and Four (4)
Overload Disc per Axle. For work rotating diameters from 8"
to 22 ft., Variable Speed Rotation by Inverter Drive with 20 ft
Remote Pendant Control. 460 volt input.
1 set PAN PR180/60 "NEW" Pandjiris Model PR-180/60
Turning Rolls. Drive and Idler. 120,000 lb Weight Capacity (Add
a Second Idler Roll for a Total Capacity of 180,000 lb). 12" to
21 Diameter Capacity. Variable Speed from 3.0 to 75 IPM. 20"
Diameter x 15" Wide Rubber Wheels. Pendant Control. 460 Volt
1 set PAN PR270/90 "NEW" Pandjiris Model PR-270/90
Turning Rolls. Drive and Idler. 180,000 lb Weight Capacity (Add
a Second Idler Roll for a Total Capacity of 270,000 lb). 12" to
21 Diameter Capacity. Variable Speed from 5.6 to 55.7 IPM.
20" Diameter x 20" Wide Rubber Wheels. Pendant Control.
460 Volt
USED TANK & PIPE TURNING
ROLLS
1 ea T309002 Kistler / Pandjiris Model U-150 / U-150H Pipe
Rotator with Clamping Roller System. 1" - 8"
Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical
Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With
Optional #151 Cart and Forward / Stop / Reverse/Variable Speed
Rotary Foot Drum Control. An Excellent System for Flange and
Elbow Welding on Small Diameter Pipe. 115 Volt. Good
Condition
T809008 Kistler / Pandjiris Model U-150 / U-150H
Pipe Rotator with Clamping Roller
System. 1" - 8" Clamping Range. 660
lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity.
Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart
and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum
Control. An Excellent System for Flange and Elbow Welding on
Small Diameter Pipe. 115 Volt. Serial #11002. Good
Condition
T809009 Kistler / Pandjiris Model U-150 / U-150H
Pipe Rotator with Clamping Roller
System. 1" - 8" Clamping Range. 660
lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity.
Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart
and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum
Control. An Excellent System for Flange and Elbow Welding on
Small Diameter Pipe. 115 Volt. Serial #11011.Good
Condition
T809010 Kistler / Pandjiris Model U-150 / U-150H
Pipe Rotator with Clamping Roller
System. 1" - 8" Clamping Range. 660
lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity.
Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart
and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum
Control. An Excellent System for Flange and Elbow Welding on
Small Diameter Pipe. 115 Volt. Serial #11013.Good
Condition
1 ea T603002 Ransome PTR Pipe Support Stand. 1,000 lb
Weight Capacity. 2" to 36" Diameter Capacity. 8"
Diameter x 2" Wide Steel Wheels. 8" Height Adjustment from
24" to 32". Serial #2918044 Good Condition
1 ea T612012 Pandjiris Model OS-15 Pipe Support Stand. 1,500
lb Capacity. 2" to 24" Diameter Capacity. Manual
Adjustable Height. Serial #800-9138-1 Good Condition
1 ea T701005 Pandjiris Piper 3 Turning Rolls. 4,000 lb
load capacity, 3-1/2" to 40" diameter capacity. Variable
speed from 2.0 to 60 IPM. Drive and idler. 2-1/2" wide X
12" diameter steel wheels on both the drive and idler. Pendant
Control. Serial #N/A Good Condition
1 ea T610008 Pandjiris Piper 3 Turning Rolls. 4,000 lb
Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable
Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X
12" Diameter Steel Wheels on the Powered Unit, Rubber on the
Idler Unit. Pendant Control. Serial #N/A Good Condition
1 ea T505006 Pandjiris Piper 3 Turning Rolls. 4,000 lb
Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable
Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X
12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good
Condition
1 ea T505007 Pandjiris Piper 3 Turning Rolls. 4,000 lb
Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable
Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X
12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good
Condition
1 ea T505008 Pandjiris Piper 3 Turning Rolls. 4,000 lb
Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable
Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X
12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good
Condition
T808003 Pandjiris Piper 3 2,000 lb Idler. 3.5
to 40 diameter capacity. 2,000 lb weight capacity. 12 diameter
x 2.5 wide rubber wheels. Good Condition
T808004 Pandjiris Piper 3 2,000 lb Idler. 3.5
to 40 diameter capacity. 2,000 lb weight capacity. 12 diameter
x 2.5 wide rubber wheels. Good Condition
T808005 Pandjiris Piper 3 2,000 lb Idler. 3.5
to 40 diameter capacity. 2,000 lb weight capacity. 12 diameter
x 2.5 wide rubber wheels. Good Condition
T808006 Pandjiris Piper 3 2,000 lb Idler. 3.5
to 40 diameter capacity. 2,000 lb weight capacity. 12 diameter
x 2.5 wide rubber wheels. Good Condition
T808007 Custom 2,000lb Idler Roll. 1.5 to
48 diameter capacity. 2,000 lb weight capacity. 10.5 diameter
x 2.75 wide rubber wheels. Wheels manually adjust from 1.75 to
21 center to center by a threaded bolt. Good
Condition
T808008 Custom 2,000lb Idler Roll. 1.5 to
48 diameter capacity. 2,000 lb weight capacity. 10.5 diameter
x 2.75 wide rubber wheels. Wheels manually adjust from 1.75 to
21 center to center by a threaded bolt. Good
Condition
T808009 Custom 2,000 lb Idler Roll. 1.5: to
60 diameter capacity. 2,000 lb weight capacity. 10.5
diameter x 2.75 wide rubber wheels. Wheel settings of 11
and 26 center to center. Good Condition
T8080010 Custom 2,000 lb Idler Roll. 1.5: to
60 diameter capacity. 2,000 lb weight capacity. 10.5
diameter x 2.75 wide rubber wheels. Wheel settings of 11
and 26 center to center. Good Condition
1 set T605003 Worthington "Ranger 3" Pipe Turning
Rolls. 4,000 lb Capacity. 3.5" to 40" Diameter
Capacity. Travel Speed from .9 to 37.7 IPM. 3" Wide x 12"
Diameter Rubber Wheels. Drive & Idler. Pendant Control. 120
Volt. Serial #N/A Good Condition
1 ea P410004 Ferguson 16/2-F475-270 Pipe Rotator with Clamping
Roller System. 3,000 lb Load Capacity. 3" to 20"
Diameter Capacity. Variable Speed Pipe Rotation by a Set of 12"
Diameter Steel Wheel Turning Rolls with a Hold Down Devise. Turning
Rolls are Mounted on a Constant Speed Side Arm Table that has 360
Degree Power Rotation. A Unique System for Welding Off Set Pipe
and Pipe Elbows in Any Position. Serial #61418 Good Condition
1 ea T405001 Radian 3,000 lb Turning Rolls. Drive Roll
with Idler. 3,000 lb Total Weight Capacity. 16" Diameter x
4" Wide Rubber Tires. Overload Discs. Constant Speed Friction
Drive Rotation. 4" Minimum to 36" Maximum Diameter
Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up
or Paint Good Condition
1 ea T405002 Radian 3,000 lb Turning Rolls. Same As Above.
Electrical Re-Conditioned - No Clean Up or Paint Good
Condition
T904001 Ransome Ranger 3PR/3IR 4,000 lb Turning Rolls. 4,000
lb weight capacity. 3.5 to 40 diameter capacity. Variable
speed from 1.2 to 37.7 IPM. 3.5 wide x 12 diameter rubber
wheels. With pipe hold down devise. Currently mounted on 24 high
stands. 115 volt. Serial #990272
Good Condition
1 ea T976004 Worthington Type A, 4000 lbs Driver Only. 15"
dia. X 3" Wide Rubber Faced Rolls, Variable Speed, 12,000 lbs
Turning Capacity. Good Condition
1 set T708014 Weldwire Model WWRD-2 4,000 lb Turning Rolls. 4,000
lb capacity for 1 drive and 1 idler. 3.5" to 40" diameter
capacity. 12" diameter x 3" wide rubber wheels. Pendant
control. 120 volt. Serial #9439/9471 Good Condition
1 ea T711010 Aronson WRI-5 5,000 lb Idler Roll. 5,000 lb
weight capacity. 6" to 12 diameter capacity. Idler Only !!
Serial #n/a Good Condition
1 ea T711011 Aronson WRI-5 5,000 lb Idler Roll. 5,000 lb
weight capacity. 6" to 12 diameter capacity. Idler Only !!
Serial #n/a Good Condition
T810023 Aronson WRI-5 5,000 lb Idler. 6 to
6 diameter capacity. 12 diameter x 4.75 wide rubber wheels
with overload discs. Serial #9304
Good Condition
T810028 Cayuga 5,000 lb Power Elevation Unit Frame Roll. 5,000
lb weight capacity. 24 minimum length capacity. 30 to 72
diameter capacity. Variable speed travel. Powered elevation
from 36 to 48 to the top of the wheels. 12
diameter x 3 wide rubber wheels. 230 or 460 volt. Serial #28A86
Good Condition
1 ea T405003 Radian 5,000 lb Turning Rolls. Drive Roll
with Idler. 5,000 lb Total Weight Capacity. 16" Diameter x
1" Wide Steel Wheels. Overload Discs. Constant Speed Chain
Drive Rotation. 4" Minimum to 36" Maximum Diameter
Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up
or Paint Good Condition
1 ea T405004 Radian 5,000 lb Turning Rolls. Same as Above.
Electrical Re-Conditioned - No Clean Up or Paint Good
Condition $ 2,950. Converted to Variable Speed with Pendant
1 ea T409003 Ransome/Worthington AIRR Idler Roll. 5,000 lb
Weight Capacity. 5" to 12 Diameter Capacity. 2-1/2"
Wide x 16" Diameter Rubber Wheels Good Condition
1 ea T409004 Ransome/Worthington AIRR Idler Roll. 5,000 lb
Weight Capacity. 5" to 12 Diameter Capacity. 2-1/2"
Wide x 16" Diameter Rubber Wheels Good Condition
1 set T10805 Teledyne-Readco TRR-50, 5000 lb Steel Wheel
Turning Rolls. Variable Speed ½ HP, 115 volt, Pendant Control
of 2.5 to 75 IPM. 9" diameter x 4" wide Steel Wheels. For
diameters from 3" to 66". Now set in unitized frame. 1980
Ser. #S-84563. Good Condition
2 ea T204001 Aronson T1I 6,000 Idler Roll. 6,000 lb
Capacity. 24" Diameter x 3" wide Rubber Wheels. 4' Minimum
Capacity, 10' Maximum Diameter Capacity. Idler Only. Serial
#6049 Good Condition
1 ea T405007 Radian 10,000 lb Turning Rolls. Drive Roll
and Idler. 10,000 lb Total Weight Capacity. 16" Diameter x
3.5" Wide Rubber Wheels. Constant Speed Rotation. 4"
Minimum to 144" Maximum Capacity. 230/460 Volt. Electrical
Re-Conditioned - No Clean Up or Paint Good Condition or Converted
to Variable Speed with Pendant.
1 ea T209003 Aronson Model WPS4WD101-18 4-Wheel Drive Unit
Frame Pipe Turning Roll. "1995" 10,000 lb Capacity.
18" Frame Length. 24" to 54" Diameter Capacity.
15" Diameter x 2.5" Wide Steel Wheels. Variable Speed from
2.0 to 50 IPM. Pendant Control. Used for Overlaying of Short
Steel Mill Rolls. Serial #9580 Good Condition
T810025 Aronson WRD-10C Drive Roll. 10,000 lb
weight capacity, 30,000 lb turning capacity. 12 to 6 diameter
capacity. Variable speed from 2 to 50 ipm. 20 diameter x 5
wide rubber wheels with overload discs. Serial #72033 Good
Condition
1 ea T508003 Worthington "A" 10,000 lb Turning
Rolls. 10,000 lb Weight Capacity.5" to 72" Diameter
Capacity. Variable Speed Rotation from 6.1 to 61 IPM by a Sheave
Drive. 16" Diameter x 3" Wide Rubber Wheels. On/Off
Pendant. 230/460Volt. Drive and Idler. Serial #N/A "As-Is"
Only or Completely Reconditioned
1 ea T508004 Worthington "A" 10,000 lb Turning
Rolls. 10,000 lb Weight Capacity.5" to 12 Diameter
Capacity. Variable Speed Rotation from 6.1 to 61 IPM by a Sheave
Drive. 16" Diameter x 3" Wide Rubber Wheels. On/Off
Pendant. 230/460Volt. Drive and Idler. Serial #N/A "As-Is"
Only or Completely Reconditioned
1 ea T704013 Aronson Model WRD-20 20,000 lb Drive Roll Only. 20,000
lb weight capacity. 60,000 lb turning capacity. 6" to 13
Diameter capacity. 12" diameter x 13-3/8" rubber wheels.
Variable speed from 2.0 to 50 IPM. Serial #83440 Good Condition
1 ea T209006 Aronson WRD-10/WRI-10 10 Ton Turning Rolls. 20,000
lb weight capacity. 6" to 13 diameter capacity. Variable
speed travel from 2 to 50 IPM. 12" diameter x 4" wide
rubber wheels with over load discs. Drive & Idler. Serial #63132
Good Condition
1 ea T510016 Irco 10T-PR 10 Ton Turning Rolls. 20,000 lb
Capacity, 12" to 60" Diameter Capacity. 19" Diameter
x 4" Wide Rubber Wheels. Variable Speed Drive. Pendant Control.
230/460 Volt. Serial #5203 Good Condition
1 set TSP10802P Pandjiris MM-15T-SPL Rotation System for
Ultrasonic Testing. This is a U.T. Rotation System for Digitally
Indicated, Variable Speed, Turning of Cylindrical Parts under fluids
flow. The System uses the Missouri Mule 15 Ton Turning Roll
Configuration, Specially Manufactured for this type of Testing. The
Drive Wheels are 16" dia. Grooved, Hardened Steel which are can
be pivoted up and down for various workpiece diameters. The Idler
Wheels are 6" Grooved, Hardened Steel , and have 13" of
Motorized Powered Adjustable Height. There are "Vertical Thrust
Rolls" on both driver and idler to prevent unwanted
"walking". The Driver and Idler separation is adjustable
for lengths from 24" to 100" by a long hand wheel screw.
The whole system is in a fluid collection pan. Ser. #673-862 Very
Good Condition
1 set TSP10801P Pandjiris MM-30T-SPL Rotation System for
Ultrasonic Testing. This is a "1994" U.T. Rotation
System for Digitally Indicated, Variable Speed, Turning of
Cylindrical Parts under fluids flow. The System uses the Missouri
Mule 30 Ton Turning Roll Configuration, Specially Manufactured for
this type of Testing. The Drive Wheels are 20" dia. Grooved,
Hardened Steel which are can be pivoted up and down for various
workpiece diameters. The Idler Wheels are 6" Grooved, Hardened
Steel , and have 14" of Motorized Powered Adjustable Height.
There are "Vertical Thrust Rolls" on both driver and idler
to prevent unwanted "walking". The Driver and Idler
separation is adjustable for lengths from 30" to 120" by a
long hand wheel screw. The whole system is in a fluid collection pan
fitted with removable platform slat sections. Ser. #SO. 60-4604 This
is a "Ready to Ship" Rotation System in Excellent
Condition
1 ea T704008 Aronson Model WRD-30 30,000 lb Drive Roll Only. 30,000
lb weight capacity. 90,000 lb turning capacity. 8" to 18
diameter capacity. Variable speed from 1.4 to 40 IPM. 20"
diameter x 7" wide rubber wheels with overload discs. 240/460
volt. Serial #N/A Good Condition
T808002 Ransom SA-15PR/SA-7.5IR Rustler 15 Ton
Turning Roll Set. Drive and Idler. Ransome
Rustler rolls automatically adjust to take any circular piece from
12 to 10 diameter. 30,000 lb weight capacity. 12 diameter x
3.5 wide rubber wheels. Variable speed travel from 4.8 to 48 ipm.
Pendant Control. 230 or 460 volt. Serial #7925369/8025370 Good
Condition
T810024 Ransome BIRR 45,000 lb Idler. 15 tons 7
to 8 diameter capacity. 20.5 diameter x 7 wide rubber
wheels. Serial #364298 Good Condition
T901015 Ransome Model BIRR 15 Ton Idler Roll Only. 30,000
lb weight capacity. 7 to 20 diameter capacity.
7 x 20 diameter rubber wheels. Serial #6726407 Good
Condition
T901016 Ransome Model BIRR 15 Ton Idler Roll Only. 30,000
lb weight capacity. 7 to 14 diameter capacity.
7 x 20 diameter rubber wheels. Serial #n/a Good
Condition
T901017 Ransome Model BIRR 20 Ton Idler Roll Only. 40,000
lb weight capacity. 7 to 20 diameter capacity. 7 x 20
diameter rubber wheels. Serial #3626324 Good Condition
T901011 Aronson Model WRI-60 30 Ton Idler Only. 60,000
lb weight capacity. 8 to 18 diameter capacity. 12 wide x
20 diameter rubber wheels. Serial #n/a Good Condition
T901012 Aronson Model WRI-60 30 Ton Idler Only. 60,000
lb weight capacity. 8 to 18 diameter capacity. 12 wide x
20 diameter rubber wheels. Serial #n/a Good Condition
T901021 Pandjiris Unit Frame 34 Ton Turning Rolls on
Variable Speed Travel Car. 68,000 lb turning capacity. 7
to 14 diameter capacity with a fixed axel center of 72.
Variable speed rotation. 5 sets of 5 wide x 20 diameter rubber
wheels spaced over the 30 length of a variable speed travel car
that runs on 69 gauge rail track. Pendant control. Serial #
60-4595 Good Condition
T901022 Pandjiris Unit Frame 34 Ton Turning Rolls
on Variable Speed Travel Car. 68,000 lb turning capacity.
7 to 14 diameter capacity with a fixed axel center of 72.
Variable speed rotation. 5 sets of 5 wide x 20 diameter rubber
wheels spaced 30 over the length of a variable s. Good
Condition
T901013 Ransome Model BPRR/BIRR 30 Ton
Turning Roll Set. 60,000 lb weight capacity (add an
additional idler for a total capacity of 90,000 lb). 7 to
12 diameter capacity. 7 wide x 20 diameter rubber
wheels. Variable speed rotation from 1.45 to 58 ipm. Pendant
control. 230 or 460 volt. Serial #3533295/3633841 Good
Condition
T901014 Ransome Model BPRR/BIRR 30 Ton
Turning Roll Set. 60,000 lb weight capacity (add an
additional idler for a total capacity of 90,000 lb). 7 to
20 diameter capacity. 7 wide x 20 diameter rubber
wheels. Variable speed rotation from 1.45 to 58 ipm. Pendant
control. 230 or 460 volt. Serial #665832/3626430 Good
Condition
T901018 Ransome Model CPRR 30 Ton Drive Roll Only. 60,000
lb weight capacity, 180,000 lb turning capacity. 7 to 20
diameter capacity. 14 wide x 20 diameter rubber wheels.
Variable speed rotation from 1.45 to 58 ipm. Pendant control. 230 or
460 volt. Serial #3725801
Good Condition
T901019 Ransome Model CPRR 30 Ton Drive Roll Only. 60,000
lb weight capacity, 180,000 lb turning capacity. 7 to 20
diameter capacity. 14 wide x 20 diameter rubber wheels.
Variable speed rotation from 1.45 to 58 ipm. Pendant control. 230 or
460 volt. Serial #1305 Good Condition
T901020 Ransome Model CPRR 30 Ton Drive Roll Only. 60,000
lb weight capacity, 180,000 lb turning capacity. 7 to 20
diameter capacity. 14 wide x 20 diameter rubber wheels.
Variable speed rotation from 1.45 to 58 ipm. Pendant control. 230 or
460 volt. Serial #n/a Good Condition
T901030 Ransome Model CIRR 30 Ton Idler Roll Only. 60,000
lb weight capacity. 7 to 14 diameter capacity. 14 wide x
20 diameter rubber wheels. Serial #n/a Good Condition
T901010 Aronson Model WRD-60/WRI-60 60 Ton Turning Roll
Set. 120,000 lb weight capacity (add an additional idler
for a total capacity of 180,000 lb). 8 to 18 diameter
capacity. Variable speed from 1.4 to 40 ipm. 12 wide x 20
diameter rubber wheels with overload discs. Pendant control. 230 or
460 volt. Serial #n/a Good Condition
T810030 Aronson WND60CS-86 Turbine Turning Roll Set. 60
ton capacity. 8 to 6 diameter capacity. Constant speed
rotation. 27 diameter x 5.75 wide neoprene wheels. Serial
#7386 Good Condition
T901003 Ransome Model DPRRPT/DIRRPT 90 Ton Turning Roll
Set. 180,000 lb capacity. 4 to 10 diameter capacity.
16 wide x 42 diameter foam filled rubber truck tires. Pendant
Control. 460 volt. Serial #3931611/4031261 Good
Condition
T901004 Ransome Model DPRRPT/DIRRPT 90 Ton Turning Roll
Set. 180,000 lb capacity. 4 to 10 diameter capacity.
16 wide x 42 diameter foam filled rubber truck tires. Pendant
Control. 460 volt. Serial #3931612/4031615 Good
Condition
T901005 Ransome Model DPRRPT/DIRRPT 90 Ton Turning Roll
Set. 180,000 lb capacity. 4 to 10 diameter capacity.
16 wide x 42 diameter foam filled rubber truck tires. Pendant
Control. 460 volt. Serial #3931253/4032376 Good
Condition
T901006 Ransome Model DPRRPT/DIRRPT 90 Ton Turning Roll
Set. 180,000 lb capacity. 4 to 10 diameter capacity.
16 wide x 42 diameter foam filled rubber truck tires. Pendant
Control. 460 volt. Serial #na/4033765 Good
Condition
T901007 Ransome Model DPRRPT/DIRRPT 90 Ton Turning Roll
Set. 180,000 lb capacity. 4 to 10 diameter capacity.
16 wide x 42 diameter foam filled rubber truck tires. Pendant
Control. 460 volt. Serial #na/na Good
Condition
T901008 Ransome Model DPRRPT/DIRRPT 90 Ton Turning Roll
Set. 180,000 lb capacity. 4 to 10 diameter capacity.
16 wide x 42 diameter foam filled rubber truck tires. Pendant
Control. 460 volt. Serial #3933763/4033766 Good
Condition
1 ea T605019 Teledyne-Readco 150 Ton Turbine Rolls. 150
Ton Weight Capacity. 4" to 48" Diameter Capacity. Variable
Speed Electric/Hydraulic Drive. 23-1/2" Diameter x 16"
Wide Rubber Wheels. Drive and Idler. Serial #105839/105840 Very
Good Condition
1 set T008002P Aronson 200 Ton "Twin Driver" Turning
Rolls. Model WSD-200-S2G. 3 to 10 diameter capacity. Twin
Driver Turning Rolls use one Driven Wheel on each Roll Stand. Also
one of these driven wheels has Two Final Gear Drive Worm Gears on
each side of the axle, thus the two pinions work in opposite
directions to Eliminate Backlash. This Design was developed by
Aronson for Babcock & Wilcox so the turning rolls could be used
under Vertical Boring Mills. Ser.# 667 Good Condition
