Monthly Used Welder Specials

Used Welders, Miller Lincoln, ESAB, Airco, L-Tec, Linde, OTC, Hobart, Kempi, MK, Cobramatic and PowCon

MIL-CP300SG Used Miller CP-300 Spool Gun Weld Package      

• CV, DC  Complete MIG Welding Package   
• 300 Amps @ 100% duty cycle
• Analog Meters
• 200/208/230 volts, 3-phase
• Input power cable Included
• Complete MIG Package Includes:

o   MIL-S52A Used Miller S-52A Wire Feeder

Ø  2-roll wire drive (.035” drive rolls included)

Ø  75-750 IPM wire feed speed

Ø  .023-1/8” diameter wire capacity

Ø  Wire Feed/Retract, Jog, and Purge Functions

Ø  Gas Solenoid and Contactor

o   MIL-SPM1C Used Miller Spoolmatic 1C with Miller WC-1 Relay

Ø  80-950 IPM wire feed speed

Ø  200 Amps @ 100% duty cycle

Ø  Wire Diameter Capacity:

·         .025-1/16” Aluminum

·         .030/.035 & .045 Hard wire

• MIG Gun
• Power Cable and Control Cable
• Regulator-flowmeter with gas hose
• Ground Assembly
• One Package Currently Available

MIL-CP300 Used Miller CP-300 Weld Package Complete MIG Welding Package   

• CV, DC                                                                      
• 300 Amps @ 100% duty cycle
• Analog Meters
• 200/208/230 volts, 3-phase
• Input power cable Included
• Complete MIG Package Includes:

o   MIL-S54A Used Miller S-54A Wire Feeder

Ø  4-roll wire drive (.045” drive rolls included)

Ø  75-750 IPM wire feed speed

Ø  .023-1/8” diameter wire capacity

Ø  Wire Feed/Retract, Jog, and Purge Functions

Ø  Gas Solenoid and Contactor

• MIG Gun
• Power Cable and Control Cable
• Regulator-flowmeter with gas hose
• Ground Assembly
• One Package Currently Available  

MIL-MP30E Used Miller MP30-E Welding Package Power Supply

• CV, DC Complete MIL-MM30 Welding Package  
• 300 amp @ 100% duty cycle Complete MIL-R115 Welding Package     
• 230/460 Volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIL-MM30 Package Includes:
  • Used Millermatic 30 series wire feeder (Specify Wire Diameter)
  • MIG Gun  

o   Power cable and Control Cable (R-115 to Miller Hubbell)

• Regulator-flowmeter with gas hose
• Ground Assembly
• Complete MIL-R115 Package Includes:
  • MIL-R115 New Miller R-115 wire feeder
    • 4-roll wire drive (set up for .035 diameter wire)
    • 75-750 IPM wire feed speed
    • .023-5/64” diameter wire capacity
    • Gas solenoid and Contactor
  • New MIG Gun

o   Power cable and Control Cable (R-115 to Miller Hubbell)

• Regulator-flowmeter with gas hose
• Ground Assembly  

HOB-300RVS Used Hobart Mega-MIG 300-RVS Weld Package   Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 300 amps @ 100% duty cycle
• Analog meters
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:
  • HOB-2000 Used Hobart 2000 Wire Feeder

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  60-400 IPM wire feed speed

Ø  .030-3/32” wire diameter capacity

Ø  Gas solenoid and Contactor

• Two (2) Packages Currently Available  

LIN-CV300 Used Lincoln CV-300 Weld Package  Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 300 amps @ 100% duty cycle                                   
• 230/460 Volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   LIN-LN7 Used Lincoln LN-7 Wire Feeder  

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  75-700 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Gas Solenoid and Contactor

• MIG Gun
• Interconnecting Cables
• Regulator-flowmeter
• Ground Assembly
• Heavy Duty Wire Reel Stand (60 lb Wire Spool Maximum)  

LIN-CV305 Used Lincoln CV-305 Weld Package Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 315 amps @ 100% duty cycle                                   
• 230/460 Volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   LIN-LN7 Used Lincoln LN-7 Wire Feeder  

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  75-700 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Gas Solenoid and Contactor

• MIG Gun
• Interconnecting Cables
• Regulator-flowmeter
• Ground Assembly
• Heavy Duty Wire Reel Stand (60 lb Wire Spool Maximum)  

LIN-CV400 Used Lincoln CV-400 Weld Package Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 400 amps @ 100% duty cycle                                   
• Analog Meters
• 230/460 Volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   LIN-LN7 Used Lincoln LN-7 Wire Feeder  

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  75-700 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Gas Solenoid and Contactor

• MIG Gun
• Interconnecting Cables
• Regulator-flowmeter
• Ground Assembly
• Heavy Duty Wire Reel Stand (60 lb Wire Spool Maximum)  

HOB-ARC6045 Used Hobart Excel-Arc 6045 Weld Package Power Supply ONLY

• CC/CV, DC  Complete MIG Welding Package
• 450 amps @ 100% duty cycle
• Analog Meters
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:
  • HOB-17 Used Hobart 17 Wire Feeder

Ø  2-roll wire feeder (Specify Wire Diameter)

Ø  30-600 IPM wire feed speed

Ø  .024-.068” diameter wire capacity

Ø  Gas Solenoid and contactor

• MIG Gun
• Interconnecting Cables
• Regulator-flowmeter
• Ground Assembly  

MIL-DW450 Used Miller Deltaweld 450 Weld Package Power Supply ONLY 

• CV, DC Complete MIG Welding Package
• 450 Amps @ 100% duty cycle                                  
• Analog Meters
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:
  • MIL-R115 New Miller R-115 wire feeder

Ø  4-roll wire drive (set up for .035 diameter wire)

Ø  75-750 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Gas solenoid and Contactor

• New MIG Gun

o   Power cable and Control Cable (R-115 to Miller Hubbell)

• Regulator-flowmeter with gas hose
• Ground Assembly  

MIL-DW451 Used Miller Deltaweld 451 Weld Package Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 450 Amps @ 100% duty cycle                                  
• Analog Meters
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   MIL-S22A Used Miller S-22A Wire Feeder                        

Ø  2-roll wire drive (.035” drive rolls included)

Ø  75-750 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Jog, and Purge Controls

Ø  Gas Solenoid and Contactor

• MIG Gun
• Power Cable and Control Cable
• Regulator-flowmeter with gas hose
• Ground Assembly  

MIL-DW452 Used Miller Deltaweld 452 Weld Package Power Supply ONLY

• CV, DC  Complete MIG Welding Package
  450 Amps @ 100% duty cycle                                  
• Digital Meters
• Line Voltage Compensation
• Fan-On-Demand
• 200/230/460 volts, 3-Phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   MIL-S74S Used Miller S-74S Wire Feeder  

Ø  4-roll wire drive (drive rolls included)

Ø  50-780 IPM wire feed speed

Ø  .023-1/8” wire diameter capacity

Ø  Jog, Purge, and Trigger Hold Functions

• MIG Gun
• Power Cable and Control Cable
• Regulator-flowmeter with gas hose
• Ground Assembly  

MIL-INV456P-P Used Miller Invision 456P Pulse Package  Power Supply ONLY          

• CV, DC Pulse MIG Welding Package
• 450 amps @ 100% duty cycle
• Inverter Based Power Source
• Pulse Option Available (with Miller Optima Control or 60M Series Feeder)
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:
  • MIL-D64M Used Miller D-64M Wire Feeder

Ø  4-roll wire drive (drive rolls included)

Ø  Dual Wire Feeder

Ø  50-780 IPM wire feed speed

Ø  .023-1/8” wire diameter capacity

Ø  Microprocessor Based for Programmable Pulse Weld Parameters (Pulse Capable Power Supply Required).

Ø  Connecting to 14-pin/17-pin power supplies (Maxtron 450) requires 17-pin cable (158373).

Ø  Connecting to current inverter, pulse-capable power supplies (Invision 456P & XMT 304), requires 17-pin cable (158-373), and “Y” adapter (043387).

Ø  Jog, Purge, and Trigger Hold Controls Functions

Ø  Gas Solenoid and Contactor

o   MIG Gun

o   Power Cable and Control Cable

o   Regulator-flowmeter with gas hose

o   Ground Assembly  

MIL-INV456P Used Miller Invision 456P Weld Package Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 450 amps @ 100% duty cycle           
• Inverter Based Power Source
• Pulse Option Available (with Miller Optima Control or 60M Series Feeder)
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:
  • MIL-S74S Used Miller S-74S Wire Feeder              

Ø  4-roll wire drive (drive rolls included)

Ø  50-780 IPM wire feed speed

Ø  .023-1/8” wire diameter capacity

Ø  Jog, Purge, and Trigger Hold Functions

• MIG Gun
• Power Cable and Control Cable
• Regulator-flowmeter with gas hose
• Ground Assembly  

MIL-MP65E Used Miller MP65-E Welding Package Power Supply ONLY

• CV, DC Complete MM-30 Welding Package
• 650 amp @ 100% duty cycle Complete MIL-R115 Welding Package
• 230/460 Volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MM-30 Package Includes:
  • Used Millermatic 30 series wire feeder (Specify Wire Diameter)
  • MIG Gun

o   Power cable and Control Cable (R-115 to Miller Hubbell)

• Regulator-flowmeter with gas hose
• Ground Assembly
• Complete MIL-R115 Package Includes:
  • MIL-R115 New Miller R-115 wire feeder
    • 4-roll wire drive (set up for .035 diameter wire)
    • 75-750 IPM wire feed speed
    • .023-5/64” diameter wire capacity
    • Gas solenoid and Contactor
  • New MIG Gun

o   Power cable and Control Cable (R-115 to Miller Hubbell)

• Regulator-flowmeter with gas hose
• Ground Assembly  

LIN-R3S600 Used Lincoln R3S-600 Welding Package Power Supply ONLY

• CV, DC Complete MIG Welding Package
• 600 amps @ 100% duty cycle                                   
• 230/460 volts, 3-Phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   LIN-LN7 Used Lincoln LN-7 Wire Feeder  

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  75-700 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Gas Solenoid and Contactor

• MIG Gun
• Interconnecting Cables
• Regulator-flowmeter
• Ground Assembly
• Heavy Duty Wire Reel Stand (60 lb Wire Spool Maximum)  

LIN-DC400 Used Lincoln DC-400 Welding Package Power Supply ONLY

• CC/CV, DC Complete MIG Welding Package
• 400 amps @ 100% duty cycle                                   
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   LIN-LN7 Used Lincoln LN-7 Wire Feeder  

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  75-700 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

Ø  Gas Solenoid and Contactor

• MIG Gun
• Interconnecting Cables
• Regulator-flowmeter
• Ground Assembly
• Heavy Duty Wire Reel Stand (60 lb Wire Spool Maximum)  

LIN-DC600 Used Lincoln DC-600 Welding Package Power Supply ONLY 

• CC/CV, DC Complete MIG Welding Package

• 600 amps @ 100% duty cycle                                   
• 230/460 volts, 3-phase
• Input Power Cable NOT Included (available at additional pricing)
• Complete MIG Package Includes:

o   LIN-LN7 Used Lincoln LN-7 Wire Feeder  

Ø  2-roll wire drive (Specify Wire Diameter)

Ø  75-700 IPM wire feed speed

Ø  .023-5/64” diameter wire capacity

• MIG Gun
• Power Cable and Control Cable
• Regulator-flowmeter with gas hose
• Ground Assembly  

**NEW Welder Specials** 

***Pricing is based on welders’ available On-Shelf ONLY. Limited supply available!!!***

 MIL-XMT304 NEW Miller XMT 304 CC/CV (903-471)    List Price, Power Supply ONLY

• CC/CV, DC Complete MIG Package
• Rated Output:                                                                      
  • 300 amps @ 60% duty cycle (3-phase)
  • 225 amps @ 60% duty cycle (Single Phase)
• 200/230/460/575 volts, 1/3-phase
• Input Power Cable NOT Included (available at additional pricing)

·         Complete MIG package Includes:

• Enter Wire Feeder Information Here (add USED wire feeder price to package price)

o   MIG gun

• Power cable and Control Cable
• Regulator-flowmeter and gas hose
• Ground Assembly
• One Unit Available  

LIN-INV350 NEW Lincoln Invertec V350-PRO (K1728-6) List Price, Power Supply ONLY

·         CC/CV, DC Complete MIG package

·         350 amps @ 60% duty cycle

·         200-575 volts, 1/3-Phase, 50/60 Hz   

·         Includes: 6-1/2’ Input Power Cable, & Two (2) Dinse connectors.

·         Complete MIG package Includes:

• Enter Wire Feeder Information Here (add USED wire feeder price to package price)

o   MIG gun

• Power cable and Control Cable
• Regulator-flowmeter and gas hose
• Ground Assembly
• One Unit Available

  ---

  LIN-TM300 Used Lincoln TM300/300 Power Supply Only

  ·         AC/DC, CC Complete Stick Welding Package

  ·         300 amps @ 60% duty cycle

  ·         230/460 Volts, Single Phase

  ·         Scratch-Start TIG

  • Includes: 8’ Input Power Cable
  • Complete Stick Welding Package Includes:

  o   15’ Electrode Assembly

  o   15’ Ground Assembly  

  LIN-TM500 Used Lincoln TM500/500 Power Supply Only

  ·         AC/DC, CC Complete Stick Welding Package

  ·         500 amps @ 60% duty cycle

  ·         230/460 Volts, Single Phase

  ·         Scratch-Start TIG

  • Includes: 8’ Input Power Cable
  • Complete Stick Welding Package Includes:

  o   15’ Electrode Assembly

  o   15’ Ground Assembly

  **Welder Specials**             Listed Pricing Available, While Supplies Lasts!!!

  MIL-MAX150S NEW Miller Maxstar 150-S (907134012)  List Price, Stick Welding Package

  • CC, DC
  • Rated Output:
    • 115 Volts Input; 100 amps @ 35% duty cycle
    • 230 Volts Input; 150 amps @ 30% duty cycle
  • 115/230 volts, single phase
  • Complete Stick Welding Package Includes:
    • Input power cable
    • 13’ Electrode assembly with Dinse connector
    • 10’ Ground clamp assembly with Dinse Connector
    • Miller MVP plugs; allows connection to 115 or 230 VAC receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cable.
    • Miller Auto-Line Technology; automatically connects to 115-230 VAC, single-phase power without manually linking.
    • Shoulder Strap
    • Protective X-CASE  

  LIN-AC225 NEW Lincoln AC-225 (K1170) Stick Welding Package                    

  ---

  LIN-HW306 Used L-Tec Heliweld 306 Power Supply ONLY

  • CC, AC/DC Complete Air Cooled Package
  • 300 amps @ 60% duty cycle Complete Water Cooled Package
  • 230/460, 1-phase
  • Includes: 15’ Input Power Cable
  • Complete air cooled package Includes:

  o   Air-cooled TIG torch

  o   Remote foot control

  o   Regulator-flowmeter

  o   Gas hose

  o   Ground assembly

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         Two (2) units currently available  

  MIL-SYN250 Used Miller Syncrowave 250 Power Supply ONLY

  • CC, AC/DC Complete Air Cooled Package
  • 200 amps @ 60% duty cycle Complete Water Cooled Package
  • 208/230/460 volts, 1-Phase                                        
  • 92 amps draw @ 230 volts input
  • Input Power Cable NOT Included
  • Complete air cooled package Includes:

  o   Air-cooled TIG torch

  o   Remote foot control

  o   Regulator-flowmeter

  o   Gas hose

  o   Ground assembly

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         Two (2) units currently available  

  MIL-SYN350 Used Miller Syncrowave 350 Power Supply ONLY

  • CC, AC/DC Complete Water Cooled Package
  • 300 amps @ 60% duty cycle                         
  • 208/230/460 volts, 1-Phase
  • 114 amps draw @ 230 volts, single-phase, input

  ·         Input Power Cable NOT Included

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         One (1) unit currently available  

  MIL-AER300 Used Miller Aerowave 300 Power Supply ONLY 

  • CC, AC/DC Complete Water Cooled Package
  • Rated Output:
    • 300 amps @ 60% duty cycle (3-phase)
    • 200 amps @ 60% duty cycle (Single Phase)
  • Built-In Pulse
  • 200/230/460/575 Volts, 1/3-phase
  • 44 amps draw @ 230 volts, single-phase, input

  ·         Input Power Cable NOT Included

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         Two (2) units currently available  

  LIN-TIG250 Used Lincoln TIG 250/250 Power Supply ONLY

  ·         CC, AC/DC Complete Air Cooled Package

  ·         250 amps @ 40% duty cycle Complete Water Cooled Package

  ·         208/230/460 volts, single-phase

  ·         92 amps draw @ 230 volts input

  ·         Input Power Cable NOT Included

  • Complete air cooled package Includes:

  o   Air-cooled TIG torch

  o   Remote foot control

  o   Regulator-flowmeter

  o   Gas hose

  o   Ground assembly

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         One (1) unit currently available  

  LIN-TIG255 Used Lincoln Square Wave TIG 255 Power Supply ONLY 

  • CC, AC/DC Complete Water Cooled Package
  • 255 amps @ 40% duty cycle
  • 230/460/575 volts, Single Phase
  • 74 amps draw @ 230 volts input
  • Includes: Input Power Cable, Running Gear/ Cylinder Cart
  • Complete Water Cooled Package Includes:
    • Used Lincoln Water Circulator
    • Used Remote Foot Control
    • Water Cooled TIG Torch
    • Regulator-Flowmeter
    • Water hose/ Gas hose assemblies
    • Ground assembly
  • One (1) unit currently available  

  LIN-TIG300 Used Lincoln TIG 300/300 Power Supply ONLY

  • CC, AC/DC Complete Water Cooled Package
  • 300 amps @ 60% duty cycle                                     
  • 208/230/460 (One Unit Available for 575 Volts), Single-phase
  • 117 amps draw @ 230 volts input

  ·         Input Power Cable NOT Included

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         Three (3) units currently available  

  LIN-TIG350 Used Lincoln Squarewave TIG 350 Power Supply ONLY

  • CC, AC/DC Complete Water Cooled Package
  • 350 amps @ 40% duty cycle
  • 208/230/460 volts, single phase
  • 100 amps draw @ 230 volts input

  ·         Input Power Cable NOT Included

  • Complete Water Cooled Package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  ·         One (1) unit currently available  

  **Welder Specials**  ONLY ONE PACKAGE AVAILABLE AT LISTED PRICE!!!  

  MIL-DYN200 New Miller Dynasty 200SD (907099)  List Price, Power Supply ONLY

  ·         CC/Stick, AC/DC Complete Air-Cooled Package

  ·         Rated Output: Complete Water-Cooled Package

  o   TIG; 150 amps @ 60% duty cycle

  o   Stick; 130 amps @ 60% duty cycle

  ·         Auto-Line (allows any primary input voltage within 120-460 volts, single- or three-phase, 50 or 60 Hz, with no manual linking).

  ·         Includes: Adjustable Shoulder Strap, 10’ primary cord, Two (2) Dinse Connectors, Air-cooled TIG Torch Adapter.

  ·         Complete air cooled package Includes:

  o   Air-cooled TIG torch

  o   Remote foot control

  o   Regulator-flowmeter

  o   Gas hose

  o   Ground assembly

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  • One Unit Available

  MIL-DYN350 New Miller Dynasty 350 (907204) List Price, Power Supply ONLY

  ·         CC, AC/DC Complete Water Cooled Package

  ·         Rated Output:                                                

  o   Single Phase; 225 amps @ 60% duty cycle

  o   Three Phase; 300 amps @ 60% duty cycle

  ·         Auto-Line (allows any primary input voltage within 208-575 volts, single- or three-phase, 50 or 60 Hz, with no manual linking).

  ·         Built-in Pulsed TIG (GTAW-P) capabilities

  • Includes: 8’ Input Power Cable, and Two (2) Dinse Connectors

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  *Two (2) Miller Dynasty 350 welders currently available in-stock, at above pricing.  

  MIL-MAX300 New Miller Maxstar 300DX (903836021) Supply ONLY

  ·         CC/DC Complete Water Cooled Package

  ·         230/460 volts, 1/3 Phase                                

  ·         Rated Output:

  o   3-Phase; 250 amps @ 60% duty cycle

  o   1-Phase; 200 amps @ 60% duty cycle

  ·         Auto-Link (Connectable to 230 or 460 volts, single or 3-phase power, without manual linking).

  ·         Built-in Pulsed TIG (GTAW-P) capabilities

  • High-Frequency Arc Start Capable
  • Includes: 8’ Input Power Cable, and Two (2) Dinse Connectors

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  • One Unit Available

  MIL-XMT304 New Miller XMT 304 CC/CV (903471)

  • CC/CV, DC Complete Water Cooled Package
  • Rated Output:                                                                      
    • 300 amps @ 60% duty cycle (3-phase)
    • 225 amps @ 60% duty cycle (Single Phase)
  • 200/230/460/575 Volts, 1/3-phase
  • Miller Auto-Link Technology; Circuit automatically links the power source to primary voltage being applied (230/460 or 460/575 VAC, single or three-phase).
  • Input Power Cable NOT Included

  ·         Complete water cooled TIG package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  • One Unit Available

  MIL-SYN250DX New Miller Syncrowave 250DX (907-195) Power Supply ONLY

  • CC, AC/DC Complete Air Cooled Package
  • 200 amps @ 60% duty cycle Complete Water Cooled Package
  • 208/230/460 volts, 1-Phase
  • Includes: Running Gear/ Cylinder cart, 8’ Input power cable, & Two (2) Dinse Connectors.

  ·         Complete air cooled package Includes:

  o   Air-cooled TIG torch

  o   Remote foot control

  o   Regulator-flowmeter

  o   Gas hose

  o   Ground assembly

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  • One Unit Available

   

  LIN-INV205T New Lincoln Invertec V205-T AC/DC Power Supply ONLY

  ·         CC/CV, AC/DC  (K1855-1)   Complete Air Cooled Package

  ·         115/230 volts, 1-Phase, 50/60 Hz Complete Water Cooled Package

  ·         Rated Output:

  o   115 volts; 120 amps @ 60% duty cycle

  o   230 volts; 170 amps @ 60% duty cycle

  ·         18 amps draw @ 230 volts input

  ·         Includes: 6-1/2’ Input Power Cable

  ·         Complete air cooled package Includes:

  o   Air-cooled TIG torch

  o   Remote foot control

  o   Regulator-flowmeter

  o   Gas hose

  o   Ground assembly

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  • One Unit Available

  LIN-INV350 New Lincoln Invertec V350-PRO (K1728-6) Power Supply ONLY

  ·         CC/CV, DC Complete Water Cooled Package

  ·         200-575 volts, 1/3-Phase, 50/60 Hz                                       

  ·         350 amps @ 60% duty cycle

  ·         Amperage Draw:

  o   42 amps @ 230 volts input (3-phase)

  o   85 amps @ 230 volts input (single-phase)

  ·         Factory Model

  ·         Includes: 6-1/2’ Input Power Cable, & Two (2) Dinse connectors.

  ·         Complete water cooled package Includes:

  o   Water circulator, 115 VAC

  o   Torch Coolant

  o   Water cooled TIG torch

  o   Cable cover

  o   Remote foot control

  o   Ground assembly

  o   Regulator-flowmeter

  o   Water hose/ Gas Hose

  • One Unit Available

  ---

  LIN-LN7 Used Lincoln LN-7 GMA Wire Feeder  Wire Feeder Package

  ·         2-roll wire drive (Specify Wire Diameter)

  ·         75-700 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable  

  LIN-LN25GS Used Lincoln LN-25 Wire Feeder Wire Feeder Package

  ·         2-roll wire drive

  ·         50-700 IM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Arc sensing lead and clip

  o   20” Power Cable

  ·         Three (3) Units Currently Available  

  LIN-LN25 Used Lincoln LN-25 Wire Feeder Wire Feeder Package

  ·         2-roll wire drive

  ·         50-700 IM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         NO Gas Solenoid or Contactor

  ·         Includes:

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Arc sensing lead and clip

  o   20” Power Cable

  ·         One (1) Unit Currently Available  

  LIN-DH10B Used Lincoln DH-10 Welding Boom Wire Feeder Package

  ·         12’ Long ZipLine welding boom

  ·         Dual wire feeder

  ·         4-roll wire drive

  ·         35-750 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   Welding power supply platform

  o   Two (2) sets of drive rolls

  o   Two (2) MIG guns

  o   One (1) control cable

  o   Two (2)  power cable

  o   Two (2) wire feed conduits

  ·         Three (3) Units Currently Available  

  MIL-S21E Used Miller S-21E Wire Feeder  Wire Feeder Package

  ·         2-roll wire drive

  ·         75-600 IPM wire feed speed

  ·         .023-.045” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable

  ·         One (1) Unit Currently Available  

  MIL-S22A Used Miller S-22A Wire Feeder Wire Feeder Package

  ·         2-roll wire drive

  ·         75-750 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Jog, and Purge Controls

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable

  ·         Four (4) Units Currently Available  

  MIL-S22D Used Miller S-22A Wire Feeder Wire Feeder Package

  ·         2-roll wire drive

  ·         75-750 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Jog, and Purge Controls

  ·         Remote Voltage and Wire Feed control

  ·         Digital Meter

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable

  ·         One (1) Unit Currently Available  

  MIL-S62S Used Miller S-62S Wire Feeder Wire Feeder Package 

  ·         2-roll wire drive

  ·         50-780 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Jog, Purge, and Trigger Hold Controls

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable

  ·         Three (3) Units Currently Available  

  MIL-S64S Used Miller S-64S Wire Feeder   Wire Feeder Package

  ·         4-roll wire drive

  ·         50-780 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Jog, Purge, and Trigger Hold Controls Functions

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable

  ·         One (1) Unit Currently Available  

  MIL-D64M Used Miller D-64M Wire Feeder Wire Feeder Package (Maxtron 450)

  ·         4-roll wire drive Wire Feeder Package (New Inverter)

  ·         Dual Wire Feeder

  ·         50-780 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Microprocessor Based for Programmable Pulse Weld Parameters (Pulse Capable Power Supply Required)

  o   Connecting to 14-pin/17-pin power supplies (Maxtron 450) requires 17-pin cable (158373).

  o   Connecting to current inverter, pulse-capable power supplies (Invision 456P & XMT 304) require 17-pin cable (158373), and “Y” adapter (043387).

  ·         Jog, Purge, and Trigger Hold Controls Functions

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   Two (2) sets of drive rolls

  o   Two (2) MIG Guns

  o   Control Cables

  ·         Three (3) Units Currently Available  

  MIL-D64D Used Miller D-64D Wire Feeder Wire Feeder Package 

  ·         4-roll wire drive

  ·         50-780 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Dual Wire Feeder

  ·         Jog, Purge, and Trigger Hold Controls Functions

  ·         Digital Meters

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   Two (2) sets of drive rolls

  o   Two (2) MIG Guns

  o   Control Cable

  ·         One (1) Unit Currently Available  

  MIL-D64DS Used Miller D-64D Wire Feeder Wire Feeder Package

  ·         4-roll wire drive

  ·         50-780 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Dual Wire Feeder

  ·         Jog, Purge, and Trigger Hold Controls Functions

  ·         Digital Meters

  ·         Dual Schedule Parameter Settings

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   Two (2) sets of drive rolls

  o   Two (2) MIG Guns

  o   Control Cable

  ·         One (1) Unit Currently Available  

  MIL-S74S Used Miller S-74S Wire Feeder Wire Feeder Package

  ·         4-roll wire drive

  ·         50-780 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Jog, Purge, and Trigger Hold Functions

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG gun

  o   Control Cable

  ·         Three (3) Units Currently Available  

  MIL-S54D Used Miller S-54D Wire Feeder Wire Feeder Package

  ·         4-roll wire drive

  ·         70-750 IPM wire feed speed

  ·         .023-1/8” diameter wire capacity

  ·         Digital Meter

  ·         14-Pin amphenol control cable

  ·         Jog, and Purge Functions

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable

  ·         One (1) Unit Currently Available  

   

  HOB-17 Used Hobart 17 Wire Feeder Wire Feeder Package

  • 2-roll wire feeder (Specify Wire Diameter)
  • 30-600 IPM wire feed speed
  • .024-.068” diameter wire capacity
  • Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of drive rolls

  o   MIG Gun

  o   Control Cable  

  HOB-DUAL2 Used Hobart Dual Wire Feeder Wire Feeder Package

  ·         2-roll wire feeder (Specify Wire Diameter)

  ·         60-900 IPM wire feed speed

  ·         .024-1/8” diameter wire capacity

  • Includes:

  o   Gas Solenoid and Contactor

  o   Two (2) sets of drive rolls

  o   Two (2) MIG guns

  o   Control Cable  

  HOB-DUAL4 Used Hobart Dual Wire Feeder Wire Feeder Package

  ·         4-roll wire feeder (Specify Wire Diameter)

  ·         60-900 IPM wire feed speed

  ·         .024-1/8” diameter wire capacity

  • Includes:

  o   Gas Solenoid and Contactor

  o   Two (2) sets of drive rolls

  o   Two (2) MIG guns

  o   Control Cable  

  **New Wire Feeders**  

  MIL-R115 NEW Miller R-115 Wire Feeder  LIST Price

  ·         4-roll wire feeder

  ·         75-750 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of .035” drive rolls

  o   MIG gun

  o   Control Cable, R-115 to Miller Hubbell  

  MIL-22A NEW Miller 22A Wire Feeder

  ·         2-roll wire feeder

  ·         75-750 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of .035/.045” drive rolls

  o   MIG gun

  o   Control Cable, 22A to Miller 14-pin  

  LIN-LN7 NEW Lincoln LN-7 GMA Wire Feeder

  ·         2-roll wire drive

  ·         75-700 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor  

  LIN-LF72 NEW Lincoln LF-72 Standard Duty Wire Feeder                  

  ·         2-roll wire drive                                                        

  o   MAXTRAC wire drive system

  ·         500-800 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas Solenoid and Contactor

  o   One (1) set of .035/.045” drive rolls

  o   400 Amp MIG gun

  o   Control Cable

  ·         Optional Heavy Duty wire reel stand (60 lb maximum wire spool) available.  

  LIN-LN25P NEW Lincoln LN-25 PRO Wire Feeder                               

  ·         2- roll wire drive

  o   MAXTRAC wire drive system

  ·         50-700 IPM wire feed speed

  ·         .023-5/64” diameter wire capacity

  ·         Includes:

  o   Gas solenoid and Contactor

  o   Flow meter

  o   Gun bushings

  o   15’ Arc Sensing Lead & Clip

---

Ask For Todd todd@weldplus.com

Pictures and Prices of Welders are Available upon Request. Inventory is subject to availability. Prices are based FOB Cincinnati, Ohio All welders are located at our facility in Cincinnati, Ohio 

Home - Welder Links Page - E-Mail - Links Page

Weld Plus Inc, 4790 River Road, Cincinnati, Ohio 45233 
1.513.941.4411-1.800.288.9414 Fax 1.513.467.3585
sales@weldplus.com
Send mail to webmaster@weldplus.com with questions or comments about this website.
Last modified:

.Copyright © 1996-2012 Weld Plus Inc.